Simpson Strong-Tie HES10B10 1000mm Heavy Engineered Bent at 100mm Pack of 50

A direct replacement for traditional restraint straps, the innovative design of these lightweight straps allows ease of handling and installation whilst maintaining the structural strength and robustness of much heavier weight types. The HES (heavy engineered strap) replace the traditional heavy (30 x 5mm) restraint straps in roof and floor construction. Reduced thickness allows the HES strap to span the bottom chords of trusses and over floor joists without the need for notching. HES straps are less than 40% of the weight, quicker to fit, and overcome many fixing problems associated with traditional heavy straps. Approved Document A of the Building Regulations requires lateral restraint to be provided at each floor at a maximum of 2 metre centres Restraint straps “perpendicular” to the floor joists are required to be held tight against the masonry and fixed across the first 3 joists Restraint straps “parallel” to the floor joists are required to be held tight to the masonry and be at least 1200mm long The characteristic tensile strength for horizontal restraint straps should not be less than 8 kN Formed edge design gives additional strength on bend Quicker to install – can fit over top of floor joists and truss bottom chords Easier to course with blockwork No need to notch joists Complies with BS EN 845-1

Related Products:

Simpson Strong-tie HES10B10 Heavy Engineered Bent at 1000mm Pack of 10 Simpson Strong-Tie HES10B10 1000mm Heavy Engineered Bent at 100mm Simpson Strong-tie HES15B10 1500mm Heavy Engineered Bent at 100mm Pack of 10 Simpson Strong-tie HES12B10 1200mm Heavy Engineered Bent at 100mm Pack of 10 Simpson Strong-tie HES15B10 1500mm Heavy Engineered Bent at 100mm Pack of 50 Simpson Strong-tie HES12B10 1200mm Heavy Engineered Bent at 100mm Pack of 50 Simpson Strong-tie HES15B10 1500mm Heavy Engineered Bent at 100mm Simpson Strong-tie HES12B10 1200mm Heavy Engineered Bent at 100mm Simpson Strong-Tie Heavy Engineered Strap Bent 1.5mm x 38mm x 600mm Simpson Strong-Tie Heavy Engineered Strap Bent 1.5mm x 38mm x 800mm Simpson Strong-Tie Light Engineered Strap Bent 1.5mm 33mm x 600mm Simpson Strong-Tie Safety Fast Masonry Hanger 200 mm x 100 mm SFH200/100/100 Simpsons Strong-Tie 33mm Light Engineered Bent Strap LES 800mm Simpson Strong Tie 5mm Twist Restraint Strap 30 x 1000mm Simpson STRONG-TIE L10F00 2.5mm Flat Restraint Strap 30 x 1000mm Simpson STRONG-TIE H10F00 5mm Flat Restraint Strap 30 x 1000mm Simpson STRONG-TIE H12F00 5mm Flat Restraint Strap 30 x 1200mm Simpson Strong-tie JHA270/91 Timber to Timber Joist Hanger 91mm Simpson Strong-tie JHA270/47 Timber to Timber Joist Hanger 47mm Simpson Strong-Tie Masonry Supported Joist Hanger 200 mm x 75 mm JHM200/75 Simpson H6T10 5mm Twist Restraint Strap 30 x 600mm Simpson Strong-Tie Masonry Supported Joist Hanger 250 mm x 75 mm JHM250/75 Simpson Strong-Tie Masonry Supported Joist Hanger 225 mm x 75 mm JHM225/75 Simpson Strong-Tie Masonry Supported Joist Hanger 200 mm x 47 mm JHM200/47 Simpson Strong-Tie Heavy Duty Face Fix Hanger 213 mm x 76 mm SAE500/76/2 Simpson Strong-Tie Masonry Supported Joist Hanger 175 mm x 47 mm JHM175/47 Simpson Strong-Tie Masonry Supported Joist Hanger 150 mm x 47 mm JHM150/47 Simpson Strong-Tie Masonry Supported Joist Hanger 225 mm x 91 mm JHM225/91 Simpson Strong-Tie Safety Fast Joint Cap 225 mm x 100 mm SFJC225/100 Simpson JHA450/125 Timber to Timber Joist Hanger Simpson JHA270/63 Timber to Timber Joist Hanger Simpson JHA450/91 Timber to Timber Joist Hanger Simpson JHA450/150 Timber to Timber Joist Hanger Simpson Strong-Tie Girder Truss Clip 47 mm wide TCP47 Simpson JHA450/47 Timber to Timber Joist Hanger Simpson Strong-Tie Masonry Supported Joist Hanger 225 mm x 100 mm JHM225/100 Simpson JHM225/150 Masonry Supported Joist Hanger Simpson Strong-tie C2KS Wall Starter Kit 2236mm Simpson JHM100/47 Masonry Supported Joist Hanger Simpson JHM225/47 Masonry Supported Joist Hanger

Terms and Conditions - Privacy Policy