Setcrete Latex Floor Levelling Compound 20kg T0603E5A

Setcrete™ Latex is a floor levelling compound for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared. An easy to use floor levelling compound – just add water in correct quantity as directed, mixing with a suitable Mixing Paddle and Drill for a minimum of 2 minutes Setcrete Latex is self-smoothing and can be applied at thicknesses between 2-10mm Drying is dependent upon the absorbency of the sub floor, ambient temperature, and humidity. However, after 2 hours it should be hard enough for you to walk on Before applying a floor covering, Setcrete Latex should be left uncovered for 24 hours when applied at 2-5mm thickness. For more than 5mm it should be left for 48 hours Setcrete Latex is suitable to use over a wide range of absorbent sub floors which should first be coated with Setcrete Acrylic Primer diluted in a ratio of 1-part primer to 4 parts water. For non-absorbent sub floors, the surface should first be primed with un-diluted Setcrete Acrylic Primer to promote adhesion The working time for use is approximately 15 – 20 minutes at 20°C, depending upon the sub floor absorbency, ambient temperature, and humidity. Do not mix more than one bag at a time For further information and technical advice regarding the use of Setcrete Latex, please email the Technical Services Department – contact@setcrete.co.uk