Category Archives: Power Tools
Tsurumi Floodmate 4 Emergency Flood Pumping Kit
FloodMate is an emergency pumping kit which has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case TEM-25H Honda engine pump Can pump approx 80 litres per minute across 30M of level ground when used with a 1″ hose Includes Pump, 10M of 1″ phase one non-kink hose, 10M of lay flat phase two hose, 2 Hydrosacks and carry case It will pump water down to 3mm but must not run dry Initial priming of the pump with water is required before starting
Obart PVC Reinforced Suction Hose Green 2in x 30m
This suction and delivery hose is constructed from a rigid, yet flexible, nylon material with an embedded spiral helix for reinforced construction and shock resistance. It is commonly used for the suction of various liquids and abrasive materials. These hoses can be used both on the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pump. Embedded nylon spiral-helix reinforced, PVC flexible hose. Working pressure (bar): 6
Tsurumi 2in HS2.4S 240V Submersible Pump Manual
2″ Submersible pump with cast aluminum body and cast iron pump casing Impact resistant PVC strainer base for durability during robust handling Urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension 10m power cable
Tsurumi Floodmate 2 Emergency Flood Pumping Kit
FloodMate is an emergency pumping kit which has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case LSC 1.4 230v submersible pump with 480W motor Quick release hose connector 10m power cable Can pump approx 70 litres per minute across 30M of level ground when used with a 1″ hose Includes Pump, 10M of 1″ phase one non-kink hose, 10M of lay flat phase two hose, 2 Hydrosacks and carry case It will pump water down to 1mm and can run dry for long periods (eg: overnight) without damage Initial priming of the pump with water is required before starting
Green Rhino Heavy Duty Sediment Oil and Sediment Filter
This sediment and oil filter sack is a filtration system, accepted by the Environment Agency, that controls flows and cleanses the water of silt and sediment and can detect the presence of hydrocarbons Robust casing Nylon lifting straps 20kg capture weight Most effective when used with 50mm (2â?) to 80mm (3â?) pumps, e.g. 1 phase submersibles, small 3 phase submersibles and most engine driven pumps.
Tsurumi LSC1.4S 240V Puddle Residue Manual Pumpwith 10m 1in Layflat Hose
The LSC1.4S or âpuddle suckerâ is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. Integral swing check valve which will prevent backflow of water from the discharge hose 25mm Outlet 170 litre per minute flow rate 11M head 10M lay flat hose
Tsurumi 1in LSC1.4S PUDDLE/RESIDUE Manual Pump 240V
The LSC1.4S or âpuddle suckerâ is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. Integral swing check valve which will prevent backflow of water from the discharge hose 25mm Outlet 170 litre per minute flow rate 11M head
Obart PVC Reinforced Suction Hose Green 1in x 30m
This suction and delivery hose is constructed from a rigid, yet flexible, nylon material with an embedded spiral helix for reinforced construction and shock resistance. It is commonly used for the suction of various liquids and abrasive materials. These hoses can be used both on the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pump. Embedded nylon spiral-helix reinforced, PVC flexible hose. Working pressure (bar): 6
Tsurumi LSC1.4S 110V Puddle Residue Manual Pump with 10m 1in Layflat Hose
The LSC1.4S or âpuddle suckerâ is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. Integral swing check valve which will prevent backflow of water from the discharge hose 25mm Outlet 170 litre per minute flow rate 11M head 10M lay flat hose
Tsurumi 1in TEM-25H Honda Powered Centrifugal Pump
Self-priming centrifugal pump, powered by a compact and powerful 4 stroke, genuine Honda, petrol engine Aluminum body, volute, and impeller which ensure that it is light and compact Rubber feet for stability and to minimise vibration Carry handle Carbon ceramic mechanical seal Suitable for clean and dirty water Suitable for irrigation, sprinkling, flooded pit drainage, washing down and general pumping. Not fitted with engine oil alert Hose couplings, washers, clips and strainers are supplied, but not hoses
Tsurumi Floodmate 1 Emergency Flood Pumping Kit
FloodMate is an emergency pumping kit which has a powerful pump, two packs of Hydrosacks and discharge hoses for defending a property from low level flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case BPS100, 230 volt submersible pump with 100W motor Quick release hose connector 10m power cable Can pump approx 40 litres per minute across 30M of level ground when used with a 1″ hose Includes Pump, 10M of 1″ phase one non-kink hose, 10M of lay flat phase two hose, 2 Hydrosacks and carry case It will pump water down to 3mm but must not run dry No initial priming required
Tsurumi HS2.4S 110V Submersible Pump Manual with 2in 10m Layflat Hose
2″ Submersible pump with cast aluminum body and cast iron pump casing Impact resistant PVC strainer base for durability during robust handling Urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension 10m power cable 10M lay flat hose included
Tsurumi 1in LSC1.4S PUDDLE/RESIDUE Manual Pump 110V
The LSC1.4S or âpuddle suckerâ is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. Integral swing check valve which will prevent backflow of water from the discharge hose 25mm Outlet 170 litre per minute flow rate 11M head
Tsurumi LSC1.4S 110V Manual Puddle Residue Pump with 6m 1in Layflat Hose
The LSC1.4S or âpuddle suckerâ is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. Integral swing check valve which will prevent backflow of water from the discharge hose 25mm Outlet 170 litre per minute flow rate 11M head 10M lay flat hose
Obart PVC Layflat Hose Blue 3in x 50m
This Layflat Hose, with its lightweight structure, easy movement and storage, is faultless for use on the delivery side of submersible, centrifugal and surface mounted water pumps. Requiring no real installation, except rolling and laying, it lies flat on the ground when idle, but with water pressure, it delivers pumped water to exactly where it is required.â Yarn reinforced, PVC Layflat Hose. Working pressure (bar): 3
Tsurumi LSC1.4S 240V Puddle Residue Manual Pumpwith 6m 1in Layflat Hose
The LSC1.4S or âpuddle suckerâ is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. It incorporates a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. Integral swing check valve which will prevent backflow of water from the discharge hose 25mm Outlet 170 litre per minute flow rate 11M head 10M lay flat hose
Tsurumi 2in HS2.4S 240V Submersible Pump Auto
2″ Submersible pump with cast aluminum body and cast iron pump casing Impact resistant PVC strainer base for durability during robust handling Urethane vortex impeller offers excellent wear resistance in site applications where the water contains sand and silt in suspension 10m power cable
App BPS100A Submersible Automatic Pump 240V
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted Automatic model – Incorporates a tube type float switch for narrow sump applications, which will turn on at 184mm and off at 100mm Fitted with a carbon/ceramic mechanical seal, in an intermediate oil chamber, with an inner lip seal. This construction offers good wear resistance and protection in the event of short periods of dry running 10m power cable Not recommended for ponds or water features 19mm and 25mm outlets 70 litre per minute flow rate up to 3mm solids 6.5M head
Obart PVC Layflat Hose Blue 1in x 50m
This Layflat Hose, with its lightweight structure, easy movement and storage, is faultless for use on the delivery side of submersible, centrifugal and surface mounted water pumps. Requiring no real installation, except rolling and laying, it lies flat on the ground when idle, but with water pressure, it delivers pumped water to exactly where it is required.â Yarn reinforced, PVC Layflat Hose. Working pressure (bar): 3
Obart PVC Reinforced Suction Hose Green 3in x 30m
This suction and delivery hose is constructed from a rigid, yet flexible, nylon material with an embedded spiral helix for reinforced construction and shock resistance. It is commonly used for the suction of various liquids and abrasive materials. These hoses can be used both on the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pump. Embedded nylon spiral-helix reinforced, PVC flexible hose. Working pressure (bar): 6
