Category Archives: House Accessories
Compression Burst Repair Coupling 15 x 15 x 80mm
For a speedy system build use compression fittings. WRAS Approved – Suitable for hot & cold water systems Joint can be dismantled and re-built Manufactured to EN1254-1 Quick & easy, heat free installation Fitting can be made on wet pipe work Pressure tested to 16 bar
Compression Male Elbow 22mm x 3/4in – Bag of 10
Compression Male Iron Elbow 22mm x 3/4″ fittings can used on a wide range of applications including central heating and hot & cold water supplies Fast and simple installation Heat free, no soldering needed Joint can be dismantled and re-built Joints can be made on wet pipework Standard 5 Year Manufacturing Guarantee Manufactured to EN1254 Specification WRAS approved where required Pressure tested to 16 bar UK manufacture Actual Size: 22 mm x 3/4 inch
Wednesbury Copper Coated Coils 15mm x 20m
Copper Coil manufactured to EN1057 Tube is suitable for hot and cold water services, gas services, sanitation and central heating. These plastic coated tubes will withstand temperatures up to 95°C (203°F)with occasional peaks up to 110°C (230°F). The plastic is tightly extruded on to the copper tube in a seamless and continuous run, it is durable and more effective than some other methods of protection against environments which may be aggressive to the copper tube. 100% recyclable Copper Tube BSI Kite-Marked UK Manufacture Company 9001 & 14001 Approved Can be used in every part of Plumbing & Gas installation Copper is healthy & safe Non permeable, giving protection against anything that could contaminate the water supply Plastic coated to protect the product when buried Yellow plastic coated Copper resists heat, corrosion, pressure & fire
JG Speedfit monobloc flexible connector hose 15mm x M10 male
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a female mixer tap. This hose is ideal for the connection to monobloc mix taps. To make a connection simply push the fitting fully on to the pipe and screw the thread into the bloc. The hose has off set spanner locations to ease installation. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods Note: With all plastic pipes the relevant manufacturer’s pipe insert is required. Easy to install Suitable for use in confined places No tool installation Works very well in confined spaces and removes the need for on-site hot works Needs its own pipe inserts to work optimally Not suitable for central heating systems WRAS approved Conforms to BS 7291 Kitemarked to KM39767
Urfic Geneva Lock Handle Polished Brass
Premium quality door handles manufactured to the highest standard. Premium finish for both internal and external use For use with a sashlock Woodscrews and bolt through fixings supplied
4Trade Grab Adhesive Solvent Free 290ml
Instant Grab Adhesive. 4Trade Instant grab solvent free Adhesive is a versatile multi-purpose adhesive. It has high initial grab and sets to form an extremely high strength bond. Suitable for interior and exterior use. Solvent free Sets to form high strength bond Suitable for interior and exterior use Container type: Cartridge Size: 290ml
Iko Armourglass Tile Red Square Shingles 3m2 Pack 21
Glass fibre based bitumen, 4 tab strip slates, ideal for giving the appearance of a highly decorative tiled roof finish. Covers a maximum 3m2 Extremely easy to install Can be used on a wide variety of buildings, temporary or permanent Long lasting weatherproof protection More economical than using cement based slates or tiles based on the amount of effort required to install Laid from 15 deg to 85 deg Self adhesive tabs for ease of installation in summer, in colder conditions the bond will take longer therefore blobs of lap mastic should be applied on each corner Use 20mm large head galvanised clout nails as reinforcement, this is recommended for steep sloped roofs and when laying in colder conditions SAA Fire rating BS 476: Part 3 2004
Hyco Vented Mixer Tap 170 mm x 230 mm Chrome – HFTAPQ
The vented mixer tap comes complete with flexible hose for ease of installation. The hoses are 3/8″BSP suitable for direct connection to the vented undersink units HF05VC and HF10VC. It also comes complete with adaptor to connect to 15mm mains pipe work. Vented mixer tap to be used with the Handyflow Undersink vented point of use water heater Supplied complete with hoses Supplied as standard with Handyflow Undersink vented point of use water heater No need for expansion vessel, relief valve or reducing valve as the unit can vent through the tap
4Trade 3/4in Delta Tap Washer (Pack of 10)
Ideal for replacing worn washers for many plumbing applications. Used to create a water tight seal when the tap is closed to stop the flow of water The 4Trade brand represents trade quality and value for money
Plasson Reducing Tee 25 x 20 x 25 mm 7340DCD
Ideally used for conveying water and other fluids in urban and inter-urban infrastructure, industrial, mining, landscape, and farming applications. Connect two pipes to one single pipe Mechanical compression fittings tested to withstand working pressures of up to 16 bar Impressive stress resistance Easy to install Leak free seal Connects to many pipe types and materials WRAS approved
Compression 7lb Copper to Lead Coupling with Liner 12 x 25mm
These fittings are suitable for connecting modern plastic and copper pipe to old lead pipework. No need for flames or solders Actual size: 25mm x 1/2in Actual Size: 12 x 25 mm
Plasson 7850 Male Elbow 25 x 32mm
Ideally used for conveying water and other fluids in urban and inter-urban infrastructure, industrial, mining, landscape, and farming applications. Easy to use, reliable and very well engineered system for joining PE pipes, water company accepted Quick and easy to install Durable polypropylene design Robust construction 50 year design life No tools required to use WRAS approved
Straight Coupling Compression 28mm
Compression Straight Coupling 28mm fittings can used on a wide range of applications including central heating and hot & cold water supplies Fast and simple installation Heat free, no soldering needed Joint can be dismantled and re-built Joints can be made on wet pipework Standard 1 Year Manufacturing Guarantee Manufactured to EN1254 Specification WRAS approved Pressure tested to 16 bar UK manufacture
Iko Armourglass Black Square Shingles 3m2 Pack 21
Glass fibre based bitumen, 4 tab strip slates, ideal for giving the appearance of a highly decorative tiled roof finish. Covers a maximum 3m2 Extremely easy to install Can be used on a wide variety of buildings, temporary or permanent Long lasting weatherproof protection More economical than using cement based slates or tiles based on the amount of effort required to install Laid from 15 deg to 85 deg Self adhesive tabs for ease of installation in summer, in colder conditions the bond will take longer therefore blobs of lap mastic should be applied on each corner Use 20mm large head galvanised clout nails as reinforcement, this is recommended for steep sloped roofs and when laying in colder conditions SAA Fire rating BS 476: Part 3 2004
4Trade 10mm Brass Olives (Pack of 10)
An effective way of providing a water tight seal. An effective way of providing a water tight seal Used in compression fittings, no need for flame or solder The 4Trade brand represents trade quality and value for money Quality product
Vitra S20 55cm Washbasin 1TAP HOLE5502 Basin Only
The product, which has been manufactured using high-quality Vitreous China, comes in flawless White finish. Supplied with one tap-hole and overflow, it is backed by ten years guarantee.? Manufacturing code of this product is 5502L003-0999 Supplied with 1 tap hole and overflow Size: 550mm [W] x 440mm [D] x 175mm [H] White finish Made from Vitreous China 10 years guarantee from the manufacturer
Wednesbury Copper Coated Coils 22mm x 20m
Copper Coil manufactured to EN1057 Tube is suitable for hot and cold water services, gas services, sanitation and central heating. These plastic coated tubes will withstand temperatures up to 95°C (203°F)with occasional peaks up to 110°C (230°F). The plastic is tightly extruded on to the copper tube in a seamless and continuous run, it is durable and more effective than some other methods of protection against environments which may be aggressive to the copper tube. 100% recyclable Copper Tube BSI Kite-Marked UK Manufacture Company 9001 & 14001 Approved Can be used in every part of Plumbing & Gas installation Copper is healthy & safe Non permeable, giving protection against anything that could contaminate the water supply Plastic coated to protect the product when buried Yellow plastic coated Copper resists heat, corrosion, pressure & fire
Stelrad Softline Plan Single Panel Single Convector (Type 11 -K1) Radiator 600mm x 1000mm
Stelrad combines the most sophisticated production resources in Europe with substantial investment in testing and verification of performance data, which has helped us create high output radiators delivering heating performance that exceed expectation. Stunning simplistic finish Featuring a flat exterior for the ultimate in minimal design Available in a wide range of heights and widths Complete with 15 year guarantee
Mira Showers 2.1731.001 Premium Shower Seat White/Chrome
The Mira Premium Shower Seat is a comfortable and stylish Shower Seat, offering a slim-line design, the fold-away Mira Premium Shower Seat can be used in or out of the showering area. Can be used in or out of showering area Integrated drain holes for maximum comfort Conveniently folds up when not in use Slim line design Must Only Be Fitted To Solid Walls 150kg Weight Limit
Iko Armourglass Square Shingles – Slate Grey
Glass fibre based bitumen, 4 tab strip slates, ideal for giving the appearance of a highly decorative tiled roof finish. Glass fibre based bitumen, 4 tab strip slates Covers a maximum area of 3m² Long lasting weatherproof protection More economical than using cement based slates or tiles based on the amount of effort required to install More economical than using cement based slates or tiles based on the amount of effort required to install Self adhesive tabs for ease of installation in summer, in colder conditions the bond will take longer therefore blobs of lap mastic should be applied on each corner Use 20mm large head galvanised clout nails as reinforcement, this is recommended for steep sloped roofs and when laying in colder conditions SAA Fire rating BS 476: Part 3 2004
