Category Archives: House Accessories
Compression 90 Degree Elbow 54mm
Compression fittings are suitable for connecting copper tubes in plumbing and heating applications Compatible with Copper Tube to BS EN 1057 Manufactured to EN1254-2 Easy to install Creates a mechanical joint when tightening the nut
Wavin HEP2O Hx x 50/15W Standard Barrier Pipe Coil 15mm x 50m
Easy to install and with proven performance, Hep2o is the primary solution for central heating systems and hot and cold water services. Exceptionally flexible Smartpack dispenser allowing the coiled pipe to come out straight Incorporates an oxygen barrier to inhibit oxygen permeation Not suitable for conveying gas, oil or underground supplies 50 year guarantee BS 7291 WRAS approved
Briton 2130BD C SES Door Closer
Over head door closure for use on fire / smoke compartmentation doors. Accufit system ensure accurate fitting, enhancing the operation and life of the door closer All-over cover conceals fixings and adjustment screws to prevent tampering Quick release arm assembly for quick and accurate installation Adjustable backcheck minimises risk of injury and damage to adjacent walls and door frame Adjustable delayed action delays the closing cycle, allowing slow moving pedestrians to pass through safely Adjustable closing strength avoids the need to predetermine the door detail at the point of specification and allows for site variations Suitable for doors 40-120kg, 850-1400mm
Plasson 1061 PVC Non Return Valve Fi 32mm
Ideally used for conveying water and other fluids in urban and inter-urban infrastructure, industrial, mining, landscape, and farming applications. Plasson valves are female threaded (cylindrical) and male threaded (conical) Mechanical compression fittings tested to withstand working pressures of up to 16bar BS 21 Compliant Actual size: 1 1/4in
Stelrad Softline Deco Single Panel Single Convector (Type 11 -K1) Radiator 600mm x 400mm
It’s the ultimate in minimalism for radiators as the slim profile of the Softline Plan is an attractive addition to any space. The minimalist, stylish design of a Softline Plan has an understated, flat finish which is simplicity at its best. Stelrad combines the most sophisticated production resources in Europe with substantial investment in testing and verification of performance data, which has helped us create high output radiators delivering heating performance that exceed expectation. Minimalistic sleek design Premium exterior and Stelrad quality Available in a wide range of heights and widths Complete with 15 year guarantee 348 W 1187 BTU/h 10 Bar Working Pressure Softline Series hardware pack as standard Containing; L Brackets, 1 x Blanking Plug, 1 x Airvent, 2 x Branded Clips, 6 x Continental Saddle Clips
Bradstone Natural Sandstone Autumn Green Paving Slab 300mm x 300mm x 22mm
With its unique shape, colour and texture, Natural Sandstone offers a stunningly individual paving solution for traditional gardens. Riven natural sandstone paving Available as a circle and patio pack Each paver is unique with tonal variations and different profiles Calibrated for easier laying When laid using a 10-15mm joint each pack contains enough paving slabs to cover 8.15m²
Compression Swivel Bent Tap Connector 15mm x 1/2 – Bag of 10
Compression Bent Swivel Tap Connector 15mm x 1/2″ fittings can used on a wide range of applications including central heating and hot & cold water supplies Fast and simple installation Heat free, no soldering needed Joint can be dismantled and re-built Joints can be made on wet pipework Standard 5 Year Manufacturing Guarantee Manufactured to EN1254 Specification WRAS approved where required Pressure tested to 16 bar UK manufacture Actual Size: 15 mm x 1/2 inch
Tank Connector Compression 22mm
Compression Tank Connector 22mm fittings can used on a wide range of applications including central heating and hot & cold water supplies Fast and simple installation Heat free, no soldering needed Joint can be dismantled and re-built Joints can be made on wet pipework Standard 5 Year Manufacturing Guarantee Manufactured to EN1254 Specification WRAS approved where required Pressure tested to 16 bar UK manufacture
Compression Elbow Mi DZR 15mm x 3/4in
For a speedy system build use compression fittings. No need for flames or solders For use on hot and cold water systems. 5 Year Product Guarantee EN1254-2 Actual Size: 15 mm x 3/4 inch
4Trade Doc Washer Type A & B (Pack of 10)
Ideal for replacing worn washers for many plumbing applications. Replacement new type diaphragm washer to be used with Torbeck float valve, can be converted to the old type if required Only for use on Torbeck float valves The 4Trade brand represents trade quality and value for money Quality product
Plasson 63mm x 2in Male Adaptor 7020
Ideally used for conveying water and other fluids in urban and inter-urban infrastructure, industrial, mining, landscape, and farming applications Mechanical compression fittings tested to withstand working pressures of up to 16 bar Impressive stress resistance Easy to install Leak free seal Connects to many pipe types and materials WRAS approved
Hyco Vented Mixer Tap 170 mm x 230 mm Chrome – HFTAPQ
The vented mixer tap comes complete with flexible hose for ease of installation. The hoses are 3/8″BSP suitable for direct connection to the vented undersink units HF05VC and HF10VC. It also comes complete with adaptor to connect to 15mm mains pipe work. Vented mixer tap to be used with the Handyflow Undersink vented point of use water heater Supplied complete with hoses Supplied as standard with Handyflow Undersink vented point of use water heater No need for expansion vessel, relief valve or reducing valve as the unit can vent through the tap
4Trade 3/4in Delta Tap Washer (Pack of 10)
Ideal for replacing worn washers for many plumbing applications. Used to create a water tight seal when the tap is closed to stop the flow of water The 4Trade brand represents trade quality and value for money
Plasson Reducing Tee 25 x 20 x 25 mm 7340DCD
Ideally used for conveying water and other fluids in urban and inter-urban infrastructure, industrial, mining, landscape, and farming applications. Connect two pipes to one single pipe Mechanical compression fittings tested to withstand working pressures of up to 16 bar Impressive stress resistance Easy to install Leak free seal Connects to many pipe types and materials WRAS approved
Compression 7lb Copper to Lead Coupling with Liner 12 x 25mm
These fittings are suitable for connecting modern plastic and copper pipe to old lead pipework. No need for flames or solders Actual size: 25mm x 1/2in Actual Size: 12 x 25 mm
Compression 7lb Copper to Lead Coupling with Liner 12 x 20mm
These fittings are suitable for connecting modern plastic and copper pipe to old lead pipework. No need for flames or solders Actual size: 20mm x 1/2in Actual Size: 12 x 20 mm
Equal Elbow Compression 28mm
Compression Elbow 28mm fittings can used on a wide range of applications including central heating and hot & cold water supplies Fast and simple installation Heat free, no soldering needed Joint can be dismantled and re-built Joints can be made on wet pipework Standard 1 Year Manufacturing Guarantee Manufactured to EN1254 Specification WRAS approved Pressure tested to 16 bar UK manufacture
4Trade 15mm Brass Olives (Pack of 10)
An effective way of providing a water tight seal. An effective way of providing a water tight seal Used in compression fittings, no need for flame or solder The 4Trade brand represents trade quality and value for money Quality product 1 Year Gurantee
Vallance 2kg Multi Purpose Linseed Oil Putty – Natural
Vallance Multi Purpose Linseed Oil Putty is a traditional hand-applied setting-type glazing putty, for the external face glazing of timber or steel frames. Although based on linseed oil, the formulation has been modified to give improved drying on non-porous surfaces Good workability Suitable for wood and metal frames Overpaintable within 28 days
Tank Connector Compression 15mm
Compression Tank Connector 15mm fittings can used on a wide range of applications including central heating and hot & cold water supplies. Fast and simple installation Heat free, no soldering needed Joint can be dismantled and re-built Joints can be made on wet pipework Standard 5 Year Manufacturing Guarantee Manufactured to EN1254 Specification WRAS approved where required Pressure tested to 16 bar UK manufacture
