Category Archives: House Accessories
Tite-fix Deck-Tite 4 x 40mm Outdoor Screw Green Net-coat Qty 200
Deck-Tite unique thread pitch to Core Size Ratio gives the perfect balance between ease of insertion and pull-out retention whilst increasing the core sheer strength. Its Tri-Lock thread forms, not cuts, a thread in the material expanding the wood which then relaxes back around the screw ensuring a tight and locked fix. Once driven in the screw will not move, it is secure for good – no stubbed toes! Spiral point for immediate start. No pilot hole required Permeated case with through hardening allows the perfect balance between core ductility and surface toughness with the strength of a high tensile bolt the screw will not snap Part thread eliminates jacking where a full threaded screw tends to pull apart the jointed material Collar gives strength to the most vulnerable point of the screw, whilst allowing a deeper recess and less cam-out for a secure drive Three flats on the thread means that as the screw is driven there is less surface contact between the screw and timber allowing less battery wear, easier insertion and the screw will not work loose as the boards are walked upon Net-Coatï Green developed for new pressure treated timber and outdoor use
4Trade 25mm Drywall Screw Bright Zinc Plated Qty 1000
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of apilot hole. Hardened screws with sharp point for fast installation Corrosion resistant Mainly used to attach drywall to wood or metal studs, coarse threaded screws hold better in wood whilst fine threaded screws are more suitable when using metal studs Available in a range of sizes and lengths
4Trade M10 x 75mm Coach Screws Bright Zinc Plated Qty 20
These screws consist of an threaded cylindrical shaft that tapers to a point, with a Hex head at the other end. When these are driven into timber, the threads bite into the wood, while the head stops the screw from going all the way through as it provides compression. Used to fix heavy pieces of timber together and other heavy carpentry applications Hexagonal head for use with spanner or socket drivers Coarse single thread Zinc plated, reducing the corrosion rate in normal atmoshere Available in a range of sizes and lengths
4Trade 3.5 x 38mm Drywall Screw Bugle Head Black 1 box
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of a pilot hole. Hardened screws with sharp point for fast installation Corrosion resistant Mainly used to attach drywall to wood or metal studs, coarse threaded screws hold better in wood whilst fine threaded screws are more suitable when using metal studs Available in a range of sizes and lengths 1 box contains 1000 screws
4Trade 5 x 75mm Decking Screw Green Qty 500
For a professional flush finish that will last 4Trade Decking Screws are designed for easy of use. Suitable for exterior landscaping Coated for longer life Flush finish Quick to start easy to use
4Trade Bolt & Nut M6 x 25 Din Cup Square Hexagon Bright Zinc Plated PK5
4Trade Bolt & Nut M6 x 25 Din Cup Square Hexagon Bright Zinc Plated PK5 Use when ever a smooth finish surface is required Zinc plated, reducing the corrosion rate in normal atmoshere Supplied with nut Available in a range of sizes and lengths
4TRADE Bolt & Nut M12 x 130 Din Cup Square Hexagon Bright Zinc Plated PK5
This bolt has a square shoulder under a rounded head (Mushroom Head) which resists turning when the nut is tightened or removed. The bolt is driven into a hole the same size as the shank and then hammered the rest of the way, where the square shoulder locks firmly into place. Use when ever a smooth finish surface is required Zinc plated, reducing the corrosion rate in normal atmoshere Supplied with nut Available in a range of sizes and lengths
4Trade Clout Nail 32 x 2.65mm Aluminium 1/2kg
A short shanked nail with a large flat head, they are available in a wide range of sizes and finishes to suit a many types of applications Corrosion resistant finish Ideal for securing roofing felt and other roofing materials The large head distributes the load directly underneath the top of the nail, resulting in a firm and more secure hold Available in a range of lengths and sizes, and in various finishes to suit a full range of applications
4TRADE Bolt & Nut M12 x 220 Din Cup Square Hexagon Bright Zinc Plated PK5
This bolt has a square shoulder under a rounded head (Mushroom Head) which resists turning when the nut is tightened or removed. The bolt is driven into a hole the same size as the shank and then hammered the rest of the way, where the square shoulder locks firmly into place. Use when ever a smooth finish surface is required Zinc plated, reducing the corrosion rate in normal atmoshere Supplied with nut Available in a range of sizes and lengths
4Trade 8g x 1in Screw Japanned Round Head Qty 10
Black Japanned round head screws are ideal for black door furniture such as hinges and handles for garden gates etc. Black Japanned finish to give increased durability The 4Trade brand represents trade quality and value for money For use with wrought iron and black ironmongery Black japanned finish for increased durability Available in a range of sizes and lengths
GLOW-WORM 2000460485 45 Degree Flue Bend Pack 2
From Glow-Worm, their 45 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 45 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 45 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system. Suitable for use with all Glow-Worm high-efficiency condensing boilers Designed for 60/100 flue systems To be used as part of a horizontal or vertical flue installation Helps maintain the efficiency of the system Suitable for areas with limited space
Redland Plain Roofing Tile and Half Terracotta 34 615934
A cross-cambered concrete tile/half of traditional appearance, designed to be easy to fix. Available in a wide range of natural colours to offer a variety of design options. Works with a Redland concrete plain tile Size (overall) 266 x 165mm Minimum Pitch 35° Maximum Pitch 90° (subject to fixing specification) Minimum Headlap below 90° 65mm at 90° 35mm Maximum Headlap 88mm Minimum Gauge/Batten Spacing 88mm Maximum Gauge/Batten Spacing below 90° 100mm at 90° 115mm Hanging Length (approx.) 246mm Cover (all figures are net and do not allow for wastage) Linear cover of 1 tile 165mm Covering capacity below 90° 60 tiles/m2 at 90° 52 tiles/m2 Weight (approx.)* below 90° 75kg/m2 at 90° 65kg/m2 per pallet, including pallet (approx.) 1.01 tonnes Battens Required (at max. gauge) below 90° 10.0m/m2 Batten Size Rafter centres up to 600mm 38 x 25mm Number of Tiles/Pallet 768
4TRADE Bolt & Nut M10 x 130 Din Cup Square Hexagon Bright Zinc Plated PK20
This bolt has a square shoulder under a rounded head (Mushroom Head) which resists turning when the nut is tightened or removed. The bolt is driven into a hole the same size as the shank and then hammered the rest of the way, where the square shoulder locks firmly into place. Use when ever a smooth finish surface is required Zinc plated, reducing the corrosion rate in normal atmoshere Supplied with nut Available in a range of sizes and lengths
4TRADE Bolt & Nut M12 x 110 Din Cup Square Hexagon Bright Zinc Plated PK5
This bolt has a square shoulder under a rounded head (Mushroom Head) which resists turning when the nut is tightened or removed. The bolt is driven into a hole the same size as the shank and then hammered the rest of the way, where the square shoulder locks firmly into place. Use when ever a smooth finish surface is required Zinc plated, reducing the corrosion rate in normal atmoshere Supplied with nut Available in a range of sizes and lengths
4Trade 38mm Drywall Screw Self Drill Bright Zinc Plated Qty 1000
A drywall screw is designed for attaching drywall to wood or metal studs. It is available with either coarse or fine threads. They are threaded along their entire length and are self-threading, this allows them to be installed without the need of apilot hole. Hardened screws with sharp point for fast installation Corrosion resistant Mainly used to attach drywall to wood or metal studs, coarse threaded screws hold better in wood whilst fine threaded screws are more suitable when using metal studs Available in a range of sizes and lengths
Rawlplug 21-320 Frame Fixing 8 x 60mm
Rawlplug 21-320 Frame Fixing 8x60mm for fixing timber or metal window and door frames. For quick, easy fixing of timber door and window frames. No marking out – drill straight through frame. Countersunk Pozi-head screw provided, suitable for use with screw caps Durable PA6 grade nylon for extended fixing life Tough nylon sleeve prevents frame distortion during tightening Quick, easy fixing of timber or metal door and window frames No marking out – drill straight through frame Anti-rotation lugs
4TRADE Screw Cup 9-10g Brass Surface PK25
Idea for use with countersunk wood screws to give a decorative finish. Provide an excellent finish Brass finish Other finishes available Available in a range of sizes
4Trade Decking Screw 4 x 65mm Green tub of 200
4Trade Decking Screw 4 x 65mm Green tub of 200 Suitable for exterior landscaping Coated for longer life Flush finish Quick to start easy to use
4TRADE Bolt & Nut M12 x 180 Din Cup Square Hexagon Bright Zinc Plated PK5
This bolt has a square shoulder under a rounded head (Mushroom Head) which resists turning when the nut is tightened or removed. The bolt is driven into a hole the same size as the shank and then hammered the rest of the way, where the square shoulder locks firmly into place. Use when ever a smooth finish surface is required Zinc plated, reducing the corrosion rate in normal atmoshere Supplied with nut Available in a range of sizes and lengths
4TRADE Bolt & Nut M12 x 130 Din Cup Square Hexagon Bright Zinc Plated PK10
This bolt has a square shoulder under a rounded head (Mushroom Head) which resists turning when the nut is tightened or removed. The bolt is driven into a hole the same size as the shank and then hammered the rest of the way, where the square shoulder locks firmly into place. Use when ever a smooth finish surface is required Zinc plated, reducing the corrosion rate in normal atmoshere Supplied with nut Available in a range of sizes and lengths
