Category Archives: DIY
Osma SquareLine 4T862 Pipe Bend 87.5° 61mm Brown
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) 87.5° socketed bend Compatible with 61mm SquareLine downpipe Concealed sockets to hide downpipe cut ends Conforms to BS EN 12200-1:2000
Osmadrain Drainage Equal Junction 45 Degree Single Socket 110mm
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m
Wavin OsmaSoil balloon grating 110mm black
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. For use with 110mmWavin OsmaSoil pipe Used to prevent birds nesting over the pipe Also prevents debris Interference fit
OsmaSoil 3S043G 82mm Socketed Pipe Grey 3M
Single socketed pipe with one ring-seal socket and one plain end spigot. Conforms to BS EN 1453-1:2000 Recycore Technology uses as much recycled material as possible whilst ensuring that products have at least the same proven performance characteristics as the virgin products they replace Recycore is certified to BS EN 13476 Suited for sanitary waste removal Manufactured in PVCu Soil pipe with at least 50 percent recycled content
OsmaDrain Double Socket Short Radius Bend 45° 110mm 4D563
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. With ring-seal sockets at each end Connects OsmaDrain pipe at 67.5° Ring-seal socket incorporates innvotive captive seal for complete confidence in joint integrity Lightweight for ease of handling Kitemarked, quality assured Extensive range providing the complete solution
Wavin OsmaSoil S/S reducer 110x50mm grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one ring-seal socket and one plain end For reducing 110mm soil to 50mm waste Ring-seal socket incorporates captive seal technology Seals cannot dislodge during fitting Kitemarked to BS EN 1329-1:2000
Wavin OsmaVent air admittance valve 82-110mm white
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. BBA approved no. 86/1643 A1 rated to BS EN 12380 Suitable for use on single or combined waste systems The all-plastic construction within the fitting cannot rust or corrode For direct connection to a 110mm soil pipe spigot For 82mm pipe, the rubber seal is removed and a short length of pipe welded to the socket Allows air into discharge pipe systems without allowing foul air to escape
Osmadrain Drainage Equal Junction 87 Degree Double Socket 110mm
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m
Wavin OsmaSoil plain ended pipe 110mm black 3m
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. Plain-ended soil pipe Soil pipe with at least 50% recycled content Recycore® Technology uses as much recycled material as possible whilst ensuring that products have at least the same proven performance characteristics as the virgin products they replace Kitemarked to BS EN 1453-1:2000
Wavin OsmaSoil VariPitch pipe flashing for pitched roofs 450x450mm
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. For use with 82mm and 110mm soil pipe to BS EN 1329 which penetrates a flat roof Size: 450×450 Aluminium base, EPDM rubber cone 400mm size also available
Osma 315mm Multi-Base Inspection Chamber Base inc. 2 x 45° Multi-Base Branch 110mm 4D917
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) 315mm base for use with Osma Multi-Base Shallow Inspection Chamber (MBIC) 110mm straight channel with one 110mm x 45° branch entry either side of the main channel for use with 110mm OsmaDrain components Lightweight, quick and easy to install For a maximum invert depth of 0.6 metres (0.9m adopted areas only) For loading applications of 15kN (1.5 tonnes) For use with 4D937 shaft Choice of 10 base configurations to achieve most suitable / cost effective solution.
Osma 450mm Universal Inspection Chamber Shaft 4D975
Osma 450mm diameter Universal Inspection Chamber Range for installations to a maximum of 1.2m (adoptable and non-adoptable) 450mm diameter shaft for use with Universal Inspection Chamber bases Shaft sections are 305mm with integral seal for quick and reliable push-fit connection. Final shaft section can be cut to length Three shaft sections required for max 1.2m invert depth (adoptable and non-adoptable) Choice of five base configurations for equal and unequal pipe connections. For use with either 110/160mm OsmaDrain or 150mm UltraRib For loading applications up to 15kN (1.5 Tonne) non trafficked / landscaped Can be used for higher loadings (max. 12.5 tonnes) when frames supported by a concrete collar
Wavin Osma RoundLine offset bend spigot 68mm white 0T026W
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) 67.5° offset For top or bottom bend of a downpipe offset Spigot may be cut back by 20mm to achieve 70mm offset Use with Offset Bend 0T025, or Running Outlets 0T624/626 Conforms to BS EN 607:2004
Osma Black Aquacell Eco 1000mm x 500mm x 400mm Unit Non-Trafficked
AquaCell systems are modular, light weight polypropylene high-void box units, assembled together to form underground structures for the temporary storage of excessive rainwater Can accommodate the functions of either infiltration or attenuation
OsmaDrain Plain Ended Pipe 160mm x 6m 6D076
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. Made with award winning Wavin Recycore® technology using over 50% recycled material Offers the same performance and quality aspects as pipe made from virgin material, but with enhanced environmental benefits SN8 stiffness class suitable in all situations including adoptable Kitemarked, quality assured 6m length for longer pipe run with fewer joints for quicker installation Lightweight and easy to handle OsmaDrain includes a wide variety of fittings (bends, junctions, access, etc); together with inspection chambers and bases.
Wavin OsmaSoil S/S bossed access pipe 110mm grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one plain end and one push-fit ring-seal socket Fitted with bolted, oval access door Ring-seal socket incorporates captive seal technology Seals cannot dislodge during fitting Kitemarked to BS EN 1329-1:2000
Wavin Osma Rainwater drive-in spike 200mm long 0T988B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) For use with bow and pin/rise and fall brackets 200mm long 300mm long version also available Galvanised mild steel
Wavin OsmaSoil plain ended socket plug 110m black
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. Plain-ended Fits inside either an Wavin OsmaSoil ring-seal or solvent socket to provide access With one closed boss socket position Kitemarked to BS EN 1453-1:2000 Kitemarked to BS EN 1329-1:2000
Wavin Osma RoundLine stopend external 12mm white 0T011W
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Fits over RoundLine gutter to blank off one end Contains retained seal for secure, watertight fit Conforms to BS EN 607:2004 Range available in black, grey, white and brown
Wavin OsmaSoil S/S bend 87.5° 110mm black
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one push-fit ring-seal socket and one plain end Ring-seal socket incorporates captive seal technology Seals cannot dislodge during fitting Kitemarked to BS EN 1329-1:2000
