Category Archives: DIY
Wavin Osma RoundLine pipe 68mm black 5.5m 0T088B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine 68mm round plain ended downpipe Compatible directly with RoundLine, DeepLine, SuperLine & StormLine gutter Compatible with SquareLine via an adaptor 5.5m length Conforms to BS EN 12200-1:2000
Wavin OsmaSoil S/S pipe 110mm black 2m
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one ring-seal socket and one plain end spigot Soil pipe with at least 50% recycled content Recycore® Technology uses as much recycled material as possible whilst ensuring that products have at least the same proven performance characteristics as the virgin products they replace Kitemarked to BS EN 1453-1:2000
Wavin Osma RoundLine pipe bracket 68mm grey 0T034G
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine pipe bracket When fixed to the wall, provides support for 68mm downpipe For vertical downpipe, brackets should be spaced a maximum of 2m apart Range available in black, grey, white and brown
Wavin Osma RoundLine stopend outlet 112mm black 0T007B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Connects RoundLine gutter to 68mm downpipe c/w one end blanked off Alternative to running outlet and internal stop end (lower capacity) Material PVC-U Also available in grey
Wavin Osma SquareLine pipe bracket 61mm white 4T834W
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) When fixed to the wall, provides support for 61mm pipe Fits pipe flush to the wall For vertical downpipe, brackets should be spaced a maximum of 2m apart
OsmaDrain Double Socket Short Radius Bend 45° 160mm 6D563
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. With ring-seal sockets at each end Connects OsmaDrain pipe at 45° Ring-seal socket incorporates captive seal technology Lightweight for ease of handling Kitemarked, quality assured Extensive range providing the complete solution
Osma 250mm Shallow Inspection Chamber Round Cover and Frame 4D325
Osma 250mm diameter Shallow Inspection Chamber range for use to a maximum invert depth of 0.6m (adoptable and non-adoptable) Round cover and frame for use with the 250mm Shallow Inspection Chamber (4D960) For non-trafficked/landscaped locations Sealed Can be used internally For loadings up to 10kN (1 tonne) when supported by a concrete collar
Wavin Osma RoofLine running outlet 150mm black 6T606B
Wavin Osma RoofLine is a 150mm (6″) half-round gutter system suitable for industrial and commercial applications. Connects to 110mm Wavin OsmaSoil downpipe Hydrodynamic outlet to handle more rainwater Connects RoofLine gutter to 110mm round downpipe Retained seals for secure, watertight installation Conforms to BS EN 607:2004
Wavin Osma StormLine gutter angle external 90° 111mm black
Wavin Osma StormLine is a high capacity domestic system with ogee profile – suitable for a maximum roof area of 254m² (with one downpipe). Use with RoundLine or SquareLine downpipe. Joins two ends of StormLine gutter on external 90° angle Profiled gutter, so internal / external angles offered Wide, ribbed seal for extra sealing contact Side fixing wings to enable line and level adjustment (traditional fixing points also inc.) Conforms to BS EN 607:2004
OsmaSoil 3S082G 82mm Pipe Bracket Grey
Pipe bracket to support OsmaSoil pipe. Fittings incorporate captive seal technology Fittings have a unique keyway to ensure the correct fall is achieved Secures seals against dislodgement during fitting Secure and safe installation Manufactured in PVCu
Wavin Osma SquareLine pipe bend 87.5° 61mm white
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) 87.5° socketed bend Compatible with 61mm SquareLine downpipe Concealed sockets to hide downpipe cut ends Conforms to BS EN 12200-1:2000
Osma 450mm Universal Inspection Chamber A15 Round Cover & Frame 4D927
Osma 450mm diameter Universal Inspection Chamber Range for installations to a maximum of 1.2m (adoptable and non-adoptable) For use with 450mm Universal Inspection Chamber shaft (4D975) For loadings up to 15kN (1.5 tonnes) A15 rated Universal IC can be use to a max 1.2m invert depth (adoptable and non-adoptable)
OsmaDrain Double Socket Adaptor 110mm 4D129
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. With push-fit ring-seal sockets at each end Connector to BS EN 295 thinwall clay spigot Connects to SuperSleve clay The OsmaDrain range includes a wide variety of fittings; together with Inspection Chambers
Wavin OsmaSoil strap boss 110mm grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. For making side connections on BS EN 1329 and BS EN 1453 plastic pipe after construction Use with required Boss Socket Adaptor 110mm size Kitemarked to BS EN 1329-1:2000
OsmaDrain Internal Drain Connector 32/40x110mm 4D298
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. Connects waste pipe to 110mm (4inch) OsmaDrain spigot Use with 32/40mm waste pipe Flexible EPDM rubber The OsmaDrain range includes a wide variety of fittings and inspection chambers
Osma SquareLine 4T803 Gutter Angle 90° 100mm Brown
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Joins two ends of SquareLine gutter at 90° Enables gutter run to continue around a corner Retained seal to provide secure, watertight joint Flexiclip gutter jointing mechanism for ease of installation Range available in Black, White and Brown
Wavin Osma RoundLine gutter angle 90° 112mm black 0T003B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Joins two ends of RoundLine gutter at 90° Enables gutter run to continue around a corner Retained seal to provide secure, watertight joint Flexiclip gutter jointing mechanism for ease of installation Range available in black, grey, white and brown
OsmaSoil 4S167G 110mm Ring-Seal Bend 15ø Grey
One push-fit ring-seal socket and one plain end spigot 15° bend to connect OsmaSoil Recycore ® pipe. Manufactured from PVCu One push-fit ring seal socket and one plain end spigot 15 degree bend to connect OsmaSoil Recycore pipe OsmaSoil 110 and 160mm fittings incorporate captive seal technology Seals cannot dislodge during fitting Environmentally friendly Fittings have a unique keyway to ensure the correct fall is achieved Has a superior grey colour finish Aesthetic modern look and compact in size
Osma 315mm Multi-Base Inspection Chamber Base inc. 2 x 45° Multi-Base Branch 110mm 4D917
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) 315mm base for use with Osma Multi-Base Shallow Inspection Chamber (MBIC) 110mm straight channel with one 110mm x 45° branch entry either side of the main channel for use with 110mm OsmaDrain components Lightweight, quick and easy to install For a maximum invert depth of 0.6 metres (0.9m adopted areas only) For loading applications of 15kN (1.5 tonnes) For use with 4D937 shaft Choice of 10 base configurations to achieve most suitable / cost effective solution.
Osma 450mm Universal Inspection Chamber Shaft 4D975
Osma 450mm diameter Universal Inspection Chamber Range for installations to a maximum of 1.2m (adoptable and non-adoptable) 450mm diameter shaft for use with Universal Inspection Chamber bases Shaft sections are 305mm with integral seal for quick and reliable push-fit connection. Final shaft section can be cut to length Three shaft sections required for max 1.2m invert depth (adoptable and non-adoptable) Choice of five base configurations for equal and unequal pipe connections. For use with either 110/160mm OsmaDrain or 150mm UltraRib For loading applications up to 15kN (1.5 Tonne) non trafficked / landscaped Can be used for higher loadings (max. 12.5 tonnes) when frames supported by a concrete collar
