Category Archives: DIY
Wavin OsmaSoil S/SW single socket coupler 110mm grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one solvent weld socket and one push-fit ring-seal socket Used for creating a fixed ring-seal joint on a plain-ended pipe or fitting Or can be used where an expansion joint is required to accommodate thermal movement Ring-seal socket incorporates captive seal technology Seals cannot dislodge during fitting Kitemarked to BS EN 1329-1:2000
OsmaDrain Double Socket Unequal Junction 45° 110x160mm 6D219
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. 160x110mm unequal junction 45° With push-fit ring-seal sockets at each end Connects OsmaDrain pipe at 45° Easy to install, push-fit connection method Utilises captive seal technology for complete confidence in joint integrity Seal can not dislodge during fitting Kitemarked, quality assured
OsmaDrain Double Socket Equal Junction 87.5° 160mm 6D193
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. 160mm equal junction 87.5° With one push-fit ring-seal socket and one plain end spigot Connects OsmaDrain pipe at 87.5° Easy to install, push-fit connection method Utilises captive seal technology for complete confidence in joint integrity Seal can not dislodge during fitting Kitemarked, quality assured
Wavin Osma DeepLine gutter union 113mm black 9T909B
Wavin Osma DeepLine is a 113mm (4 ½”) high capacity domestic gutter with semi-elliptical profile. Max roof capacity is 299m² (with one downpipe). For use with RoundLine downpipe. Joins two ends of DeepLine gutter Use with gutter support bracket 9T919 Expansion markings to ensure correct allowance for thermal expansion Conforms to BS EN 607:2004 Range available in black, grey, white and brown
Wavin Osma Rainwater steel adjustable top rafter bracket 300mm long 0T147G
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine adjustable top rafter bracket Use with Gutter Support Bracket 0T019 Angle of bracket is 30° 300mm long
Osma 315mm Multi-Base Inspection Chamber Shaft 4D937
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) 315mm shaft for Osma Multi-Base Shallow Inspection Chamber (MBIC) 315mm diameter x 150mm long for use with all types of multi-base 315mm bases Supplied with a pre-fitted elastomeric seal More than one push-fit shaft can be used to achieve required invert depth Final shaft section can be cut to length For a maximum invert depth of 0.6 metres (0.9m adopted areas only) For loading applications of 15kN (1.5 tonnes) Choice of 10 base configurations to achieve most suitable / cost effective solution.
Wavin Osma RoundLine hopper head 68mm black 0T332B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Flow capacity 2.4L/s Spigot sized for 68mm pipe Easy to handle and fix Available in a range of colours
Osmadrain Drainage Double Socket Slip Coupler 110mm
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m
Osma UltraRib 150mm Double Socketed Short Radius Bend 45° 6UR563
Osma UltraRib is a fully socketed system of pipe and fittings which combines secure jointing with ease of installation. For foul and surface water drainage for adoptable and non adoptable situations requiring a high stiffness classification Short radius 45° bend with push-fit ring seal sockets at both ends The smooth interchange between pipe and fittings gives improved hydraulic flow Osma UltraRib joints are made be placing the sealing ring between the second and third external reinforcing ribs nearest the spigot end of the pipe, which is then inserted into a socket No need to chamfer pipe when jointing & ring displacement is impossible during installation SN8 stiffness class BBA approved Available in 150-300mm diameters, UltraRib can be used up to a depth of 10m Suitable for foul and surface water drainage
Wavincoil Land Drain Pipe Coil 100mm x 25m
WavinCoil is a plastic perforated land drainage system to help manage stormwater in agriculture, sports fields and along roads and embankments.
Wavin Osma StormLine gutter jointing bracket 111mm black 8T809B
Wavin Osma StormLine is a high capacity domestic system with ogee profile – suitable for a maximum roof area of 254m² (with one downpipe). Use with RoundLine or SquareLine downpipe. Jointing bracket with central fixing point and side fixing points Adjustable fixing wings enable line and level adjustment Expansion markings to ensure correct allowance for thermal expansion Conforms to BS EN 607:2004 Range available in black and white
Wavin Osma RoundLine pipe 68mm grey 4m 0T084G
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine 68mm round plain ended downpipe Compatible directly with RoundLine, DeepLine, SuperLine & StormLine gutter Compatible with SquareLine via an adaptor 4m length Conforms to BS EN 12200-1:2000
Wavin Osma SquareLine pipe 61mm black 5.5m 4T888B
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) SquareLine 61mm square plain ended downpipe Compatible directly with SquareLine & StormLine gutter 5.5m length Can install either flush to the wall or off the wall (depending on bracket type chosen) Conforms to BS EN 12200-1:2000
Wavin Osma RoundLine swivelock running outlet with fitted offset bend 112 black 0T625B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Swivelock Running Outlet â with fitted 67.5° Offset Bend Maximum fascia depth 138mm Outlet for 68mm pipe No need to use separate offset bend
Wavin Osma RoundLine gutter support bracket 112mm white 0T019W
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine gutter bracket to support gutter 3 fixing points (central point must be used) for additional security against extreme weather events Should be installed at a minimum of 1m spacing (600cm for snow loading)
Wavin Osma DeepLine gutter support bracket 113mm black 9T919B
Wavin Osma DeepLine is a 113mm (4 ½”) high capacity domestic gutter with semi-elliptical profile. Max roof capacity is 299m² (with one downpipe). For use with RoundLine downpipe. When fixed to the fascia board, provides support for DeepLine guttering Fix a maximum of 1m apart (600mm max for snow loading) 3 fixing points for added security Conforms to BS EN 1462:2004 Range available in black, grey, white and brown
Wavin Osma RoundLine PVC-coated steel side rafter bracket 112mm black 300mm 0T746B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine side rafter bracket PVC-coated steel Angle of bracket is 30°
Wavin Osma RoundLine gutter jointing bracket 112mm black 0T005B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Joins two ends of RoundLine gutter No bracket required – fixes directly to the fascia Expansion markings to ensure correct allowance for thermal expansion Range available in black, grey, white and brown
Osma 315mm Multi-Base Inspection Chamber Base inc. 45° Right-hand branch 110mm 4D914
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) 315mm base for use with Osma Multi-Base Shallow Inspection Chamber (MBIC) 110mm straight channel with one 110mm x 45° right hand branch entry for use with 110mm OsmaDrain components Lightweight, quick and easy to install For a maximum invert depth of 0.6 metres (0.9m adopted areas only) For loading applications of 15kN (1.5 tonnes) For use with 4D937 shaft Choice of 10 base configurations to achieve most suitable / cost effective solution.
Osma DeepLine 9T919 Gutter Support Bracket 113mm Brown
Osma DeepLine is a 113mm (4 ½”) high capacity domestic gutter with semi-elliptical profile. Max roof capacity is 299m² (with one downpipe). For use with RoundLine downpipe. When fixed to the fascia board, provides support for DeepLine guttering Fix a maximum of 1m apart (600mm max for snow loading) 3 fixing points for added security Conforms to BS EN 1462:2004 Range available in Black, Grey, White and Brown
