Category Archives: DIY
OsmaDrain Double Socket Short Radius Bend 11.25° 110mm 4D568
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. With ring-seal sockets at each end Connects OsmaDrain pipe at 15° Ring-seal socket incorporates innvotive captive seal for complete confidence in joint integrity Lightweight for ease of handling Kitemarked, quality assured Extensive range providing the complete solution
Wavin Osma SquareLine gutter 100mm black 4m 4T874B
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Nominal 100mm (4″) square profile gutter Available in 2 and 4m lengths For use with Wavin Osma SquareLine gutter fittings Conforms to BS EN 607:2004 Range available in black, white and brown
Wavin Osma SquareLine pipe 61mm black 4m 4T884B
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) SquareLine 61mm square plain ended downpipe Compatible directly with SquareLine & StormLine gutter 4m length Can install either flush to the wall or off the wall (depending on bracket type chosen) Conforms to BS EN 12200-1:2000
Osma RoundLine 0T016 Gutter Angle 60° 112mm Black
Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Joins two ends of RoundLine gutter at 60° Enables gutter run to continue around a corner Retained seal to provide secure, watertight joint Flexiclip gutter jointing mechanism for ease of installation Range available in Black, Grey, White and Brown
Osma 315mm Multi-Base Inspection Chamber Base Straight Channel 110mm 4D910
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) 315mm base for use with Osma Multi-Base Shallow Inspection Chamber (MBIC) 110mm straight channel for use with 110mm OsmaDrain components Lightweight, quick and easy to install For a maximum invert depth of 0.6 metres (0.9m adopted areas only) For loading applications of 15kN (1.5 tonnes) For use with 4D937 shaft Choice of 10 base configurations to achieve most suitable / cost effective solution.
Wavin Osma SquareLine stopend internal 100mm white 4T810W
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Fits inside a SquareLine gutter fitting to blank off the end Secure fit Material PVC-U Range available in black, white and brown
Wavin OsmaSoil socket bracket 110mm black
OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. Bracket for use around an Wavin OsmaSoil socket Position in the recessed area adjacent to the sealing-ring housing Vertical pipe should be bracketed every 2m (max.) Kitemarked
Wavin OsmaSoil plain ended socket plug 110m grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. Plain-ended Fits inside either an Wavin OsmaSoil ring-seal or solvent socket to provide access With one closed boss socket position Kitemarked to BS EN 1329-1:2000
Wavin OsmaSoil S/S bend 45° 110mm black
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one push-fit ring-seal socket and one plain end Ring-seal socket incorporates captive seal technology Seals cannot dislodge during fitting Kitemarked to BS EN 1329-1:2000
Osma 315mm Multi-Base Inspection Chamber Base inc. 45°and 90° Left-hand Branches 110mm 4D933
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) 315mm base for use with Osma Multi-Base Shallow Inspection Chamber (MBIC) 110mm straight channel with one 110mm x 45° and one 110mm x 90° left hand branch entry for use with 110mm OsmaDrain components Lightweight, quick and easy to install For a maximum invert depth of 0.6 metres (0.9m adopted areas only) For loading applications of 15kN (1.5 tonnes) For use with 4D937 shaft Choice of 10 base configurations to achieve most suitable / cost effective solution.
Wavin OsmaSoil strap boss 110mm black
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. For making side connections on BS EN 1329 and BS EN 1453 plastic pipe after construction Use with required Boss Socket Adaptor 110mm size Kitemarked to BS EN 1329-1:2000
Wavin Osma SuperLine gutter 125mm black 4m 5T574B
Wavin Osma SuperLine is a 125mm (5″) half-round gutter system suitable for industrial and commercial applications. Connects to 68mm RoundLine downpipe SuperLine 125mm (5″) half-round profile gutter High capacity for commercial and industrial use 4m length For use with RoundLine downpipes and fittings
Wavin Osma RoundLine gutter support bracket 112mm black 0T019B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine gutter bracket to support gutter 3 fixing points (central point must be used) for additional security against extreme weather events Should be installed at a minimum of 1m spacing (600cm for snow loading)
Wavin OsmaSoil S/S pipe 82mm black 3m
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one ring-seal socket and one plain end spigot Compatible with Wavin OsmaSoil push-fit fittings Retained seal in pipe socket for secure installation Kitemarked to BS EN 1329-1:2000
Wavin Osma RoundLine stopend external 12mm black 0T011B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Fits over RoundLine gutter to blank off one end Contains retained seal for secure, watertight fit Conforms to BS EN 607:2004 Range available in black, grey, white and brown
Osmadrain Drainage Equal Junction 45 Degree Double Socket 110mm
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m
Wavin OsmaSoil S/S adjustable bend 90° 110mm grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one push-fit ring-seal socket and one plain end Variable angle up to 90° Can accommodate up to 60mm centre-line to centre-line misalignment of pipework Rotate segments to achieve required change of direction (flow arrow on socket indicates orientation of fitting) BBA approved Kitemarked to BS EN 1329-1:2000
Wavin Osma RoundLine pipe bend 87.5° 68mm white 0T161W
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) 87.5° socketed bend Use with 0T038W socket bracket Concealed sockets to hide downpipe cut ends
Wavin OsmaSoil pipe bracket 110mm grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. Use to support Wavin OsmaSoil pipe For 110mm Wavin OsmaSoil Vertical pipe should be bracketed every 2m (max.) Kitemarked to BS EN 1329-1:2000
Wavin Osma RoundLine gutter 112mm grey 4m 0T074G
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine nominal 112mm (4 1/2″) wide half round gutter Available in 2 and 4m lengths For use with Wavin Osma RoundLine gutter fittings Conforms to BS EN 607:2004 Range available in black, grey, white and brown
