Category Archives: DIY
Osma 315mm Multi-Base Inspection Chamber Base inc. 90° Bent Channel 110mm 4D918
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) 315mm base for use with Osma Multi-Base Shallow Inspection Chamber (MBIC) 110mm bent 90° channel for use with 110mm OsmaDrain components for use with 110mm OsmaDrain components Lightweight, quick and easy to install For a maximum invert depth of 0.6 metres (0.9m adopted areas only) For loading applications of 15kN (1.5 tonnes) For use with 4D937 shaft Choice of 10 base configurations to achieve most suitable / cost effective solution.
Wavin Osma SquareLine offset bend spigot 61mm black 4T826B
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) 67.5° offset bend – spigot For use as a top or bottom bend Minimum achievable offset 73mm Range available in black, white and brown
Wavin OsmaSoil Soil System pipe 110mm grey 3m
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one ring-seal socket and one plain end spigot Soil pipe with at least 50% recycled content Recycore® Technology uses as much recycled material as possible whilst ensuring that products have at least the same proven performance characteristics as the virgin products they replace Kitemarked to BS EN 1453-1:2000
OsmaDrain Bottle Gully Riser 4D916
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. Bottle gully rising piece for height adjustment For use with 4D900 and 4D901 Bottle Gullies 160mm diameter and 325mm long Simply remove the cover and frame from the Gully body and insert riser piece. Solvent weld cover and frame into pipe (riser) end
Osma 315mm Multi-Base Inspection Chamber Cover and Frame 4D969
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) Cover and Frame for use with Osma Multi-Base Shallow Inspection Chamber (MBIC) For non-trafficked/landscaped locations For loadings up to 15kN (1.5 tonnes) when supported by a concrete collar For external use only For use with 4D937 shaft
OsmaDrain Double Socket Slip Coupler 160mm 6D105
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. With push-fit ring-seal sockets at each end Use for new branch entry connections and repairs Combined cap & seal for secure jointing Lightweight and easy to handle OsmaDrain includes a wide variety of fittings (bends, junctions, access, etc); together with inspection chambers and bases.
Wavin OsmaSoil weathering collar 110mm grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. Used to maintain a watertight seal between pipe and traditional lead or aluminium flashing To be solvent welded to pipe using Solvent Cement Filler 4S394 For use with Wavin OsmaSoil 82mm pipe 82mm version also available
Osma SquareLine 4T836 Drain Adaptor Square To Round 61mm White
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Allows 61mm square pipe to be connected to 68mm (round) rainwater adaptor Connects to 4S149, 0T149 or 3S206 Material PVC-U Also available in black
Wavin Osma RoundLine straight running outlet 112mm white 0T624W
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) Hydrodynamic outlet to handle more rainwater Connects RoundLine gutter to 68mm downpipe Concealed socket to hide downpipe cut end Retained seals for secure, watertight installation Conforms to BS EN 607:2005 Range available in black, grey, white and brown
Osma SquareLine 4T886 Pipe 61mm Brown 2.75M
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) SquareLine 61mm square plain ended downpipe Compatible directly with SquareLine & StormLine gutter 2.75m length Can install either flush to the wall or off the wall (depending on bracket type chosen) Conforms to BS EN 12200-1:2000
Osma DeepLine 9T904 Gutter Angle 45° 113mm Black
Osma DeepLine is a 113mm (4 ½”) high capacity domestic gutter with semi-elliptical profile. Max roof capacity is 299m² (with one downpipe). For use with RoundLine downpipe. Joins two ends of DeepLine gutter at 45° Retained seal to provide secure, watertight joint ‘Flexiclip’ seal jointing mechanism, making it easy to connect gutter to fittings. Conforms to BS EN 607:2004 Range available in Black, Grey, White and Brown
Wavin Osma SuperLine stopend external 125mm black 5T511B
Wavin Osma SuperLine is a 125mm (5″) half-round gutter system suitable for industrial and commercial applications. Connects to 68mm RoundLine downpipe Fits inside a SuperLine gutter fitting to blank off the end Secure fit Conforms to BS EN 607:2004 Material PVC-U with EPDM seal
Wavin Osma SuperLine gutter angle 90° 125mm black
Wavin Osma SuperLine is a 125mm (5″) half-round gutter system suitable for industrial and commercial applications. Connects to 68mm RoundLine downpipe Joins two ends of SuperLine gutter at 45° Enables gutter run to continue around a corner Retained seal to provide secure, watertight joint Flexiclip gutter jointing mechanism for ease of installation Range suitable for commercial / industrial buildings
Wavin Osma SquareLine pipe bracket stand off 61mm black 4T833B
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) When fixed to the wall, provides support for 61mm pipe Stands the pipe off the wall For vertical downpipe, brackets should be spaced a maximum of 2m apart
Osma SquareLine 4T882 Pipe 61mm Black 2M
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) SquareLine 61mm square plain ended downpipe Compatible directly with SquareLine & StormLine gutter 2m length Can install either flush to the wall or off the wall (depending on bracket type chosen) Conforms to BS EN 12200-1:2000
OsmaDrain Gully Grating 4D906 (for 4D900/901 Bottle Gully)
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. Polypropylene gully grating – spare For use with 4D900 and 4D901 Bottle Gullies Square grid pattern Other bottle gully spares available
Osma UltraRib 150x110mm Level Invert Reducer 6UR099
Osma UltraRib is a fully socketed system of pipe and fittings which combines secure jointing with ease of installation. For foul and surface water drainage for adoptable and non adoptable situations requiring a high stiffness classification Allows connection from UltraRib 150mm to OsmaDrain 110mm pipe For use with 110mm OsmaDrain spigot One plain end and one 110mm ring-seal socket BBA approved
Osma Rainwater 0T148 Steel Adjustable Side Rafter Bracket 300mm Long
Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) RoundLine adjustable side rafter bracket Use with Gutter Support Bracket 0T019 Angle of bracket is 30° 300mm long
Wavin Osma RoundLine pipe bend 87.5° 68mm black 0T161B
Wavin Osma RoundLine is a 112mm (4½”) gutter system with circular 68mm downpipe. For domestic standard use. Use for a maximum roof area of 163m² (with one downpipe) 87.5° socketed bend Use with 0T038B socket bracket Concealed sockets to hide downpipe cut ends
Wavin OsmaSoil S/S boss adaptor (ring-seal) 40mm grey
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. Suitable for all Wavin OsmaSoil fittings with boss socket positions Connects to 40mm plastic pipe to BS EN 1451-1/1455-1/566-1 Also connects to copper pipe manufactured to BS 659 or BS 2871 Horizontal adaptors have an inbuilt 2.5° fall Kitemarked to BS EN 1329-1:2000
