Category Archives: DIY
OsmaDrain perforated galvanised steel catchment bucket
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m Galvanised removable catchment bucket for the Yard Gully For use with 4D800 only Suitable for BS EN124-B125 medium duty loading The yard gully can take discharge from maximum area of 100m_
OsmaDrain Single Socket Equal Junction 87.5° 160mm 6D190
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. 160mm equal junction 87.5° With one push-fit ring-seal socket and one plain end spigot Connects OsmaDrain pipe at 87.5° Easy to install, push-fit connection method Utilises captive seal technology for complete confidence in joint integrity Seal can not dislodge during fitting Kitemarked, quality assured
Wavin Osma SuperLine stopend internal 125mm black
Wavin Osma SuperLine is a 125mm (5″) half-round gutter system suitable for industrial and commercial applications. Connects to 68mm RoundLine downpipe Fits over SuperLine gutter to blank off one end Contains retained seal for secure, watertight fit Conforms to BS EN 607:2004 Wide range of gutter fittings available
Osmadrain Drainage 4D169 110 Access Bend Single Socket
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m
OsmaDrain Temporary Site Cap 110mm 4D295
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. Temporary site cap Use to blank off 110mm OsmaDrain socket or spigot Protects against dirt ingress OsmaDrain includes a wide variety of fittings (bends, junctions, access, etc); together with inspection chambers and bases.
Osmachannel 100OC460 Plastic End Plate
Osma RainChannel incorporates a leaf trap and end plate. The products collect and channel surface water into the drainage system.
Osma SquareLine 4T824 Pipe Connector And Bracket Stand Off 61mm Black
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Joins two ends of 61mm downpipe integral fixing bracket stands pipe off from the wall Conforms to BS EN 12200-1:2000
Osma StormLine 8T841 External Stopend Left-Hand 111mm White
Osma StormLine is a high capacity domestic system with ogee profile – suitable for a maximum roof area of 254m² (with one downpipe). Use with RoundLine or SquareLine downpipe. Fits over the left hand side StormLine gutter to blank off the end Contains retained seal for secure, watertight fit Conforms to BS EN 607:2004 Range available in Black and White
Osmadrain 4D935 110 Chamber Base Drainage
Osma 315mm diameter Multi-Base Inspection Chamber (MBIC) range for installation to a maximum invert depth of 0.6m (non-adoptable) and 0.9m (adoptable) 315mm base for use with Osma Multi-Base Shallow Inspection Chamber (MBIC) 110mm straight channel and 3 x 110mm inlets including 2 x 90¡ equal branch inlets for use with 110mm OsmaDrain components Lightweight, quick and easy to install For a maximum invert depth of 0.6 metres (0.9m adopted areas only) For loading applications of 15kN (1.5 tonnes) For use with 4D937 shaft and 4D969 Cover and Frame Choice of 10 base configurations to achieve most suitable / cost effective solution Kitemarked to BS EN 13598-1: 2010
Wavin Osma RoofLine bow and pin rise and fall bracket 150mm black 6T694B
Wavin Osma RoofLine is a 150mm (6″) half-round gutter system suitable for industrial and commercial applications. Connects to 110mm Wavin OsmaSoil downpipe Provides support for RoofLine gutter when used with appropriate build-in or drive-in spike For use with 0T985/6 and 0T988/9 spikes Diameter of rod is 8mm The pin is stainless steel, and the bracket PVC-U RoofLine guttering system utilises Wavin OsmaSoil downpipe and fittings
Wavin Osma SuperLine running outlet 125mm black
Wavin Osma SuperLine is a 125mm (5″) half-round gutter system suitable for industrial and commercial applications. Connects to 68mm RoundLine downpipe Hydrodynamic outlet to handle more rainwater Connects SuperLine gutter to RoundLine 68mm downpipe Concealed socket to hide downpipe cut end Retained seals for secure, watertight installation Conforms to BS EN 607:2004
Wavin Osma SquareLine pipe connector and bracket 61mm black 4T823B
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Joins two ends of 61mm downpipe c/w bracket integral fixing bracket Socket conceals downpipe cut end
OsmaDrain Plain Ended Access Gully 110mm 4D850
OsmaDrain, foul and surface water drainage system for use in gravity drainage applications at depths of up to 10m. Access gully with 110mm plain ended outlet Square with rotating top and grid Trapped, easy to clean and roddable Lightweight, compact design Dedicated, versatile grid Spare rotating top and grid available – 4D851
Osma SquareLine 4T836 Drain Adaptor Square To Round 61mm Black
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Allows 61mm square pipe to be connected to 68mm (round) rainwater adaptor Connects to 4S149, 0T149 or 3S206 For direct use with Osma SquareLine pipe Kitemarked
Wavin Osma SquareLine pipe bend 87.5° 61mm black
Wavin Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) 87.5° socketed bend Compatible with 61mm SquareLine downpipe Concealed sockets to hide downpipe cut ends Conforms to BS EN 12200-1:2000
Osma SquareLine 4T818 Connector To 4.5″ RoundLine Gutter 100mm Black
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Joins SquareLine to RoundLine gutter Easy conversion to one profile to the other Conforms to BS EN 607:2003 SquareLine available in Black, White and Brown
Wavin Osma RoofLine stopend external 150mm black
Wavin Osma RoofLine is a 150mm (6″) half-round gutter system suitable for industrial and commercial applications. Connects to 110mm Wavin OsmaSoil downpipe Fits over a RoofLine gutter fitting to blank off the end Contains retained seal for secure, watertight fit Conforms to BS EN 607:2004 Range available in grey and black
Wavin Osma SuperLine gutter union 125mm black
Wavin Osma SuperLine is a 125mm (5″) half-round gutter system suitable for industrial and commercial applications. Connects to 68mm RoundLine downpipe Joins two ends of SuperLine gutter (use with gutter support bracket) Expansion markings to ensure correct allowance for thermal expansion Wide, retained seals for secure installation Conforms to BS EN 607:2004
Wavin OsmaSoil S/S branch 90° 110mm black
Wavin OsmaSoil is a PVC-U Soil system for sanitary waste removal. A comprehensive system available in a variety of colours and sizes with either push-fit or solvent weld joints. With one plain end and two push-fit ring-seal sockets With 3 closed boss socket positions Wavin OsmaSoil fittings have a unique keyway to ensure the correct fall is achieved when boss socket adaptor is installed Ring-seal socket incorporates captive seal technology Seals cannot dislodge during fitting Kitemarked to BS EN 1329-1:2000
Osma SquareLine 4T838 Pipe Wall Offset 61mm Black
Osma SquareLine is a 100mm (4″) square section gutter system with 61mm square pipe – suitable for a maximum roof area of 178m² (with one downpipe) Provides 48mm offset to enable connection to drain outlet Generally required when installing SquareLine flush to the wall. Ideal for domestic housing projects Conforms to BS EN 12200-1:2000
