Category Archives: DIY
Expamet Internal Plaster Stop Bead 3000mm x 10mm x 0.40mm
Expamet 10mm Plaster Stop Bead 3000mm, manufactured from 0.4mm Galvanised Steel, for use as a trim for plaster up to openings and abutments
Marley Modern Roofing Tile Anthracite – Pallet of 192
The Modern interlocking tile is a flat, smooth, single-lap interlocking design with a slate-like appearance enhanced by a broken bond laying pattern. Anthracite provides a colour more closely resembling natural slate. Excellent covering capacity Can achieve an A+ rating in the BRE Green Guide
Catnic Cougar Open Back Cavity Wall Standard Duty Lintel 2700mm CG50/100
Open Back Cougar Lintels are for use in Cavity Wall construction. The lintels incorporate insulation, built-in plaster key and DPC. The lintels supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry. For 50-65mm Cavity, 100-115mm Inner Leaf Duplex Corrosion Protection Built-in Plaster Key Built-in DPC Integral Insulation Formed from galvanised steel then powder coated Easy to use Cougar open back profile Continuous insulation Standard lengths are available in increments of 300mm
Rockwool RWA45 Semi-Rigid Acoustic Insulation Slab 100mm x 1200mm x 600mm (2.88m2 pack)
This pack of Rockwool semi-rigid acoustic insulation slabs contains resin bonded slabs that can be used in general building and industrial applications, including as thermal insulation on floors, walls and roofs. They provide A1 fire protection and are finished with a water repellent seal to prevent decay from moisture . Excellent acoustic insulation Resists high temperatures Non-hygroscopic Easy to handle and install Non-combustible Euroclass A1 Certified to EN 13162
Worcester Greenstar 30kW Compact System Gas Boiler ERP 7733600063
The Worcester 30i System Boiler is the perfect choice for small properties such as flats and bungalows. Offering compact dimensions, a low lift weight and A-Rated efficiency, the 30i has the potential to save money on annual heating bills and offer reliability through even the coldest months. The 30i System Boiler will require a hot water cylinder in order to deliver hot water to the property. The high efficiency of the 30i boiler can cut heating and hot water bills by 15-20% annually (When replacing an older, G-Rated boiler) and is up to 30% cheaper to run. These savings mean that over the years the boiler will essentially pay for itself, as the quality of Worcester boilers means that you won’t need to replace it for many years. Easy to use, the Worcester 30i includes simple boiler controls to ensure your boiler is set at the correct temperature for the customer’s need, while also providing operational information and diagnostics to help with maintenance. 5 Year warranty on Greenstar gas boilers as standard Integrated expansion vessel and pump SEDBUK A-Rated efficiency Compact and lightweight Wall mounting jig Single sided front case Pre-wired mains cable Simple boiler controls On-board operational information and diagnostics CondenseSure style syphon inside
Drayton HTS3 Cylinder Thermostat
A cylinder thermostat switches on and off the heat supply from the boiler to the hot-water cylinder, it works by sensing the temperature of the water inside the cylinder, switching on the water heating when the temperature falls below the thermostat setting, and switching it off once this set temperature has been reached. Easy fixing to all hot water cylinders and suits all systems 50-80°C temperature range Tamper resistant Double insulated SPDT 3 (1) A 230v AC switch Bi-metal sensing element Positive on/off for test purposes Fixing wire supplied ErP Temperature Class 1 = 1% Manufactured in UK
Travis Perkins White Primed 4 Panel Smooth Door 1981 x 838 x 35mm
Stirling smooth moulded doors feature a four-panel smooth faced design that gives a welcoming, traditional appearance. Each door is supplied primed and ready to paint. This four panel moulded door combines a traditional appearance with excellent value for money. This door has a smooth face Mixed material construction using one piece smooth facings, timber and man-made materials Moulded panel doors are highly durable and more resistant to warping, twisting and splitting than solid wood doors Supplied primed ready to paint. These doors are not suitable for treatment with any type of oil, varnish, wax or polish. The lock block is located on one side of the door, the location is highlighted by ink jet printing on the top edge of the door Door may be trimmed by up to 10mm in height or width. Any reductions must be removed equally from each edge 10 year guarantee against manufacturing defects. This does not affect your statutory rights Glazed, fire door and bi-fold door are also available in this range Door furniture is sold separately
Wienerberger Facing Brick Olde Essex Red Multi – Pack of 528
Red textured stock Facing Brick with handmade type surface creases and cream and grey multi shades. Selected for its high quality aesthetic appearance Conforms to BS and EU Standards Durability meets F2 rating for severe exposure Low Salt Content – S2 Occasionally there can be a lead time on bricks from the manufacturer. If this is the case, we will let you know as soon as possible
Simpson JHA450/91 Timber to Timber Joist Hanger
The adjustable height strap, location tab and speed prongs allow this to be fitted with immense speed and accuracy The industry standard timber hanger for solid joists Speed prongs provide a temporary fix for an even quicker installation A location tab in the bottom of the hanger allows quick and accurate alignment Wider than normal strap ensures maximum contact where it counts Face fix or wrap over installation Up to 5.7kN Long Term Safe Working Load
Travis Perkins Suffolk White Primed 5 Panel Door 1981 x 762 x 35mm
Suffolk moulded doors feature an attractive grain effect design that looks great in both modern and traditional homes. Each door is supplied primed and ready to paint. Complies with standard core specification Comes with a single lock block manufactured from particle board and located on one side of the door which is highlighted by inkjet printing on the top edge Recommended to finish the door with one final coat of paint Not suitable for polishing, waxing, staining, varnishing or treatment with any type of oil It is recommended that 3 hinges are fitted to all doors weighing more than 20kg or where large differences in temperature or humidity on opposing faces can be expected. The lock block is manufactured from particle board and is located on one side of the door, the location is highlighted by ink jet printing on the top edge of the door Also available in fire door versions Does not include door furniture Can be trimmed up to a maximum of 5mm on any edge – any reductions should be removed evenly from each edge
Calder Industrial Code 4 Lead Flashing 390mm x 6000mm
Lead roof flashing provides a long-term watertight roofing option and lasts three times longer than most man-made alternatives. Lead is one of the most environmentally-friendly materials used in the construction industry The initial installation cost of lead is comparable to man-made flashings when the additional expense of adhesives and sealants are taken into account Lead is quick and easy to install in most weather conditions and requires no adhesive or other fixing materials Alternatives are very limited in the types of applications that they can be used for, and would not be suitable for more decorative flashings for which lead is renowned When bossed or dressed correctly lead has few laps or joints resulting in a high degree of weather tightness Lead lasts up to 100 years and when used for flashings will last three times longer than most man-made products there is little post-installation inspection or maintenance is required All lead sheet should be coated with patination oil after installation Guides to cover flashing and step flashing are available at http://www.calderlead.co.uk/downloads/ or use the link at http://youtu.be/eS4CfS-K0PE and http://youtu.be/GBtvHif6bTE Please refer to the Calder Training Module Ask a Question for a quick guide to selling lead
Supreme Prestressed Textured Concrete Lintel 100mm x 140mm x 2700mm R15
Precision made, high performance structural concrete lintels Lintels are designed and manufactured in accordance with BS 5977; Part 2; 1983 Declaration of Performance available at www.supreme-ce.co.uk Harmonized Technical Specification EN 845-2:2013 Order in singles. See Tech Spec for pack quantity. This product isn’t available for delivery in Scotland
Manthorpe Terracotta Weep Vent 9mm x 65mm
Used to drain lintels, Cavity Trays, and to ventilate cavity walls Please note: This item is a plastic component and therefore is not suitable for use within a) the external walls of buildings more than 11m high where people sleep on the premises (residential, institutional or hospitality) or b) external wall surfaces within 1m of the boundary if the building is 11m high or less, in England. For a compliant alternative see Rytons A1 Fire Rated Metal Rytweep Cavity Weep Vent. Has a baffled grill to help reduce the ingress of driving rain Provides 220mm2 ventilation airflow Replaces a single mortar joint
Travis Perkins Gravel and Shingle Trade Pack 10mm
This trade pack of 10mm gravel and shingle consists of small stones that are ideal for mixing with other products when concreting and floor screeding. Other uses include backfilling drains and landscaping tasks. It is recommended that the 20mm version or one of the decorative aggregates is used for driveways and paths as the small stones can be brought inside on footwear. This product will most likely be locally quarried meaning the colour may vary around the UK. This is a construction aggregate, not decorative. If you want a decorative gravel please call your nearest branch to get the colour and shape match you want. Suitable for outside storage
Expamet Exmet Galvanised Mesh Coil 65mm 20m
Expamet 65mm Coil Mesh, manufactured from 0.4mm Galvanised Steel, is a mesh reinforcement for crack control and reinforcment and internal plastering over wall chases Used to reinforce and protect plaster over chases and dissimilar backgrounds No joints, interweaving or welds to fail under stress Can easily be cut to size using tin-snips or aviation cutters Available in bundles of 5 Coil width 65mm, coil length 20m
Flexseal AC1602 Adaptor Coupling 144-160/110-122
Flexseal Adaptor Couplings, sometimes referred to as reducer couplings, are designed to connect unadopted drainage pipes with different outside diameters ð connecting larger drainage pipes to smaller drainage pipes and vice versa. Conforms to standard EN295-4 EPDM Rubber conforming to BS EN682 Stainless Steel grade 305 Provides a quick and efficient method of connecting pipes of different materials and outside diameters Reliable, tried and tested products Large variety of sizes for a multitude of pipe configurations
4Trade Hinge 2 Ball Bearing 75 x 50 x 2mm Satin Grade 7 Bsen 1935 CE Pack of 3
Ideal for hanging fire doors Smooth operation Pack of 3
Catnic Open Back Cavity Wall Heavy Duty Lintel 1500mm CH90/100
Open Back Lintels are for use in Cavity Wall construction. The lintels incorporate insulation, built-in plaster key and DPC. The lintels supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry. Duplex Corrosion Protection Built-in DPC. Restraint clips. Standard lengths are available in 150mm increments up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4570mm but excluding 4500mm). Must be suitably propped during construction. For use in timber frame construction.
Pitacs CAT5E Utp 24 Awg Networking Cable 100m
Cat5e UTP 24 AWG Networking Cable 100M – Flexible PVC outer sheath. 4 Pairs of 24 AWG Solid copper conductor Insulated and unshielded PVC Sheath ISO / IEC 11801
Wavin TwinWall 225mm Plain Ended Pipe – Unperforated 6m 9TW076
Wavin TwinWall plastic solid wall pipes and fittings are an ideal solution to manage surface water. Available in various lengths and also as perforated and half-perforated PVC pipes for irrigation systems TwinWall pipes have a strong, corrugated outer wall and a smooth inner surface to assist hydraulic flow. Lightweight, easy to handle and install 6m pipe length Longer lengths and fewer joints assist in both flow capacity and self cleansing velocity SN6 stiffness classification; a requirement for highway works BBA approved
