Category Archives: DIY
Expamet Internal Maxicon Angle Bead Standard Wing 3m
Expamet Maxicon Plaster Angle Bead 3000mm, manufactured from 0.4mm Galvanised Steel, helps provide a true, straight corner and protects and reinforces plaster Expanded wing reinforces plaster to prevent cracking Provides a clean straight corner and protects plaster edges from damage Can easily be cut to size using tin-snips or aviation cutters Suitable for 10-13mm plaster depths Available in 2.4m, 2.7m and 3m lengths Boxed 50 lengths per carton
Blue Circle Quality Assured Ready to Use Mortar 20kg
Pre-mixed and ready to use with the addition of clean water, M4 (designation III) 1:1:6 cement:hydrated lime:sand mortar. Comprising specially graded sand, lime and admixtures this Blue Circle mortar offers convenience, with no compromise in performance or quality. Weather resistant and durable, this mortar is suitable for most general brick and block applications. Also ideal for pointing or gable ends. The mix is highly workable and cohesive, with a long board life. Supplied in hard wearing; tear-proof packaging designed for external storage prior to use. Recycled content packaging and recyclable. The mortar product is grey when set. Durable, hardwearing and resistant to water. Just add water & mix. Conforms to BES 6001 for responsible sourcing
Tradeline Perimeter Channel 26mm x 3600mm
The MF Suspended System ceilings are ideal for commercial and domestic applications, where services are to be accommodated and when upgrading and protecting existing structures Used within TRADELINE MF Ceiling system Manufactured to BS EN 14195:2005/AC:2006 Galvanized steel DX51D+Z140 NA-C to BS EN 10346:2015 Fire rating classification: A1 3.6m in length
Supreme Concrete Prestressed Textured Concrete Lintel 65mm x 100mm x 1200mm P100
This lintel from Supreme Concrete is manufactured using lightweight aggregate concrete, making it easier to handle and giving greater resistance to heat transmittance. Ideal for providing masonry support window and door openings in brickwork, this lintel has a steel reinforcing rod through the middle for additional strength. Can be used for bearing under steel as a padstone or bridging across manhole openings Easy to install Coarse textured Reversible Harmonised technical specification EN 845-2:2013 Conforms to BS 5977 Part 2 1983
Marley Plain Roofing Tile Smooth Grey – Pallet of 900
The authentic, traditional design of the Marley Plain tile gives it the looks to match its outstanding versatility. The plain tile is especially suitable for details such as dormers, eyebrows and conical roofs as well as vertical cladding. This popular concrete plain tile comes in both smooth face and granular finishes. Smooth grey provides a dark, slate-like appearance. Ideal for classic roof designs such as dormer and eyebrows windows 9 different colours to provide wide design choice Can achieve an A+ rating in the BRE Green Guide Accredited to the BES 6001 standard for responsible sourcing
Warmup 140W Foil Heater 2M² Wlfh-140W/280
The Warmup Foil Heater is a streamlined electric radiant floor heater designed for use with carpet, vinyl, wood and other floating floors. Installed directly under floor finish; no self-levelling required Fully earthed flat aluminium foil will not raise floor levels Wire based system can be adapted to fit around objects Great for heating under floating floors such as laminate and hardwood Construction: Wire with advanced fluoropolymer insulation, encased in aluminium foil Width: 500mm (0.5 metre), Mat thickness: 3mm Output Rating: 140W/m² Approvals: BEAB, European compliant and CE marked 15-Year warranty SafetyNet™ Installation guarantee
4Trade Junction Box Brown Small 20 Amp 4 Terminal
Travis Perkins White Primed 4 Panel Grained Door 2040 x 726 x 40mm
The four panel grained door, offers a traditional appearance and excellent performance, a good choice for both modern and traditional interiors Mixed material construction combines one piece grain effect facings, timber and man-made materials Supplied primed ready to paint Comes with lock block located on one side of the door that is highlighted by inkjet printing on the top edge of the door Also available in glazed, fire door and bi-fold door versions Door may be trimmed by up to 10mm in height or width. Any reductions must be removed equally from each edge Door may be trimmed by up to 10 mm in height or width, any reductions must be removed equally from each edge Interior Moulded Door
Catnic Cougar Open Back Cavity Wall Standard Duty Lintel 1800mm CG50/100
Open Back Cougar Lintels are for use in Cavity Wall construction. The lintels incorporate insulation, built-in plaster key and DPC. The lintels supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry. For 50-65mm Cavity, 100-115mm Inner Leaf Duplex Corrosion Protection Built-in Plaster Key Built-in DPC Integral Insulation Formed from galvanised steel then powder coated Easy to use Cougar open back profile Continuous insulation Standard lengths are available in increments of 300mm
London Brick Company Facing Brick Rustic Antique – Pack of 390
A Facing Brick that has been in use for many years in housing, a darker red rustic Facing Brick designed to be a better match to older buildings and walls built in earlier versions of the Facing Brick, faced on one side and both end, Manufactured to BS EN 771-1 BES 6001 Responcible Sourcing Certification Made in Britain Clay is typically sourced locally from adjacent quarries, limiting the environmental impacts of transportation and by stocking your regional range of bricks, the supply chain is even shorter, reducing the carbon footprint on deliveries and helping to support your local economy F1 bricks are good for general purpose brickwork but are only moderately frost resistant Dimensional tolerance – T2
Ibstock Brick Swanage Imperial Red Stock – Pack Of 420
Michelmersh Facing Brick Freshfield Lane Selected Dark – Pack of 400
A Facing Brick which has a timeless authentic, natural look giving a sympathetic personality to any build. Long lasting and durable Manufactured in accordance with BS EN 771-1 and BS4729 Fully frost resistant and nil-slight efflorescence rated Dimensional tolerance – T2 Dimensional range – R1 Active Soluble Salts Content Category – S2 Gross dry density – 1460 kg/m3 Water absorption – 7% Thermal conductivity – 0.46 W/m.K-50%. 0.52 W/m.K-90% Occasionally there can be a lead time on bricks from the manufacturer. If this is the case, we will let you know as soon as possible
Tradeline Ceiling Furring System 50mm x 3600mm
The MF Suspended System ceilings are ideal for commercial and domestic applications, where services are to be accommodated and when upgrading and protecting existing structures Used within TRADELINE MF Ceiling system Manufactured to BS EN 14195:2005/AC:2006 Galvanized steel DX51D+Z140 NA-C to BS EN 10346:2015 Fire rating classification: A1 3.6m in length
Gledhill BIND17 Indirect Envirofoam Cylinder 2010 Part L 136L 1200mm x 400mm
Copper vented cylinder providing hot water. The cylinder is available with optional compression fittings and secondary return. Manufactured to order through Gledhill’s nationwide manufacturing centres, the product’s components such as tapping heights can be bespoke specified to suit any installation, and can be available for next day delivery to site. 10 year warranty Low standing heat loss Compression fittings available 35mm HCFC free insulation Part L1b Compliant Next day delivery available
Polytank C50C Circular Lid Kit Insulation 50 Gallon
Eurocell Roofline Profile Upvc Capping Board White 9mm X 200mm X 5m
Simpson JHA270/75 Timber to Timber Joist Hanger
JHAs are height-adjustable joist hangers used to support timber joists from timber members. This can be fitted quickly and accurately due to the adjustable height strap, location tab, and speed prongs. This product is the standard leg (JHA270) version and can be installed directly on the bearing joist or wrapped over the top to achieve higher performance. A galvanised joist hanger that provides great support with ease of installation. Published performance values are based upon 3.75 x 30mm square twist nails being used throughout. Wider strap provides more surface area on the supporting timber and allows increased nail spacing, enhancing the performance of the critical hanger-to-support part of the connection. Minimum and maximum nailing schedules are stamped into the strap providing correct installation information for site operatives. Speed-prong holds the hanger in position to allow easier attachment. The installer no longer has to try to hold hanger, joist and nail with one hand and swing a hammer with the other! JHA270 range features a location tab which allows easier alignment of the hanger. The model number and size is stamped into the seat of the hanger for easy identification, even after installation.
Catnic Timber Frame Steel Lintel Standard Duty 1200mm CTF5
The timber frame lintel range consists of single element lintel with a sloping outer face and duplex corrosion protection, which provides built-in DPC. All timber frame models must be secured with restraint clips (not supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage. Duplex Corrosion Protection Built-in DPC Restraint clips Standard lengths are available in 150mm increments up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575mm but excluding 4500mm) Timber frame lintels should be suitable propped during construction.