Category Archives: DIY

ADEY MagnaClean Professional2®

MagnaCleanse delivers an extremely effective solution because it not only removes just as much sludge from the system in the majority of cases, it also provides ongoing lifetime protection with the installation of a MagnaClean domestic filter. The process enables installers to carry out a routine system flush in as little as two hours providing a potentially more productive and profitable flushing solution for central heating professionals. 2 Year Guarantee Removes virtually ALL suspended black iron oxide in ONE pass System flushing could now be achieved in as little as TWO hours Effective system flushing results with on-going protection Cleanser remains concentrated within the system throughout the process Cleanser remains heated within the system throughout the process Effective and ongoing protection for the boiler for improved performance and efficiency No running costs Speed, efficiency and future protection with Adey MagnaCleanse complete flushing system

Expamet Thin Coat Stop Bead 2400mm x 3mm x 0.40mm

Expamet 3mm Thin Coat Stop Bead 2400mm manufactured from 0.4mm Galvanised Steel, which helps finish and protect the edges of thin coat plasters

Dryzone Targeted Treatment Damp ProCourse Cream – Box 10

Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall. Water repellent Packed in environmentally friendly 600ml foil cartridges to minimise packaging waste After treatment a 230mm solid brick wall previously affected by rising damp should normally dry out in 6 to 12 months Remains effective against rising damp for at least 20 years High level of active ingredient (>60%) Tested on wide range of substrates WTA-approved for the treatment of rising damp in highly saturated walls (up to 95% saturation) Low hazard and quick to install No electric DPC pump required BBA approved

Simpson Strong-Tie Light Duty Hanger 92 mm x 47 mm with Speed Prongs LUP230/47

Simpson Strong-Tie Light Duty Hanger 92 mm x 47 mm with Speed Prongs LUP230/47 Quick and easy to install Speed prongs have been curved for better strength Speed prongs remove the need for short nails for the joist to be attached to the hanger Fully die-formed making it strong and sturdy Safe working load 2.90kN

4Trade Double Switched Socket 1 Gang 13 Amp

13 amp rated single socket. ASTA approved Single pole Fixings included

XL PATTERN 10 WHITE PRIMED DOOR 1981 X 838 X 35MM

White Primed Pattern 10 Solid Core Internal Door This contemporary Shaker design can be finished in any colour to match your home. Constructed from mixed materials including wood and man-made materials Engineered construction for greater resistance to warping, twisting and splitting than traditional timber doors. The door can be finished using water based paints, stain or varnish as they are not suitable for treatment with any type of oil, wax or polish Door furniture is sold separately Glazed versions of this door are also available The door may be trimmed by up to 12mm in height and 12mm in width. Any reductions must be removed equally from each edge.

H+H Celcon Standard Aerated Concrete Foundation Block 3.6N 300mm

Available in Standard Grade (3.6N/mm2) and High Strength Grade (7.3N/mm2). Foundation Blocks can be used to support 3 storey constructions. They are suitable for the support of solid or cavity walls, framed construction or suspended floors, including beam and block. Celcon Foundation Blocks can be laid below ground level without mortar perpends. Simply lay them with mortared horizontal bed joints and then butt them together to prevent the passage of vermin. Solar Grade can also be used below ground, All Celcon Foundation Blocks may also be used above ground, with appropriate finishes, for solid wall construction. All Celcon Foundation Blocks may also be used above ground, with appropriate finishes, for solid wall construction. Applications: Foundations and Solid Wall Construction

90mm x 2400mm x 1200mm Celotex PIR Insulation Board GA4000

Celotex GA4000 is an easy to install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing. Available in thicknesses from 50mm to 100mm, it can be considered for roof, wall and floor applications. Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value. Low emissivity foil facing provides improved thermal performance in sealed cavity air spaces, improving the achievable U-value. Celotex boards are light and rigid assisting with ease of transportation, handling and fitting. Celotex GA4000 has been assessed by the BBA as fit for use in defined roof, wall and floor applications if installed, used and maintained as set out in the certificate. Please read the certification at insulation-UK.com/ BBA for full details and restrictions. To ensure we are providing you with the most up to date information available please visit our Manufacturer Technical Information page

Time 6491X 16mm Single Cable Green/Yellow 50m

16mm 6491X Single Core Cable G/Y 50m. BASEC approved. Suitable for Earth bonding. BASEC Approved 6491X Single Core Conduit Wiring BS EN 50525-2-31 Max. Rating: 240V, 80A Maximum operating temperature: 70¡C

Simpson STRONG-TIE H10F00 5mm Flat Restraint Strap 30 x 1000mm

Light and heavy restraint straps for vertical and horizontal restraints when connecting timber floors and roof systems to masonry walls Provides vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls Conforms to BS EN 5268 Part 3 Pre-Galvanised and edge coated

TLX Multifoil Insulation Silver 1200mm x 10m (12m2/Pack)

TLX Silver is a thin, flexible, multifoil insulation. The first BBA certified multi-foil which saves time and guarantees 0.18 u-value. It stops air leakage by providing an air-tight vapour barrier and restricting air movement in its multi-foil layers. TLX Insulation solutions LABC Registered Details meaning TLX Silver is accepted by Building Control bodies. It is light weight and flexible, making it quick and easy to install. TLX Silver can also be used in dwarf walls, dormer cheeks and flat roofs. TLX Silver works in combination with glass wool to reduce the total thickness of insulation needed and with rigid insulation to cut installation time.

Internal Moulded 6 Panel Grained Door 2040 mm x 626 mm x 40 mm

The six panel grained door, offers excellent appearance, performance and value, a good choice for the modern home. 2040mm high and 40mm thick, available in 626mm width (340134), 726mm (340135), 826mm (340136) and 926mm (877233) Does not include door furniture. Door furniture sold separately. This six-panel grain effect moulded door combines a traditional appearance with excellent value for money Mixed material construction combines one piece grain effect facings, timber and man-made materials Moulded panel doors are highly durable and more resistant to warping, twisting and splitting than solid wood doors This door is supplied primed and ready to paint. It is not suitable for treatment with any type of oil, varnish, wax or polish Door may be trimmed by up to 10mm in height or width. Any reductions must be removed equally from each edge Timber is certified by the Forest Stewardship Council Covered by a 10 year guarantee against manufacturing defects. This does not affect your statutory rights Door furniture is sold separately Interior Moulded Door

Ibstock Brick Cattybrook Brunswick Red – Pack Of 500

Ibstock Brick Is Durable, Can Be Used In Most Masonry Situations And For Matching Old Brickwork Whilst Being Quick & Easy To Lay. Durable – Can Be Used In Most Masonry Situations 65mm High – Can Be Used For Matching Old Brickwork Quick & Easy To Lay High Strength & Low Water Absorption

Solfex Single Room Mixer Pack with A Rated Pump

The SOLFEX single room underfloor heating control pack provides safe temperature controlled mixed water to an underfloor heating system with a heat output up to 3KW, a perfect solution for retro fitting underfloor heating into an additional room or conservatory. Designed to be lightweight and compact in order to connect directly onto pipe work without the need for extra brackets or supports. The Control Pack consists of a temperature mixing valve; an A rated high efficiency Grundfos circulator, isolation valves, flow and return connections and fixing kit. SOLFEX energy systems dedicated Underfloor Heating technical & Sales division can provide detailed specifications according to bespoke design requirements. Single room mixer packs require a dedicated flow and return. High Quality produced product manufactured to BS EN 1264-4 Compact bolt on unit providing quick and simple installation For space heating applications up to 3KW Easy set up within the adjustable range of 35°C to 65°C Controls flow temperature to +/- 2°C even with changing boiler flow and return temperatures A rated high efficiency circulator as standard for lower energy use and running cost No scheduled maintenance 2 Year Guarantee

140mm x 2400mm x 1200mm Celotex PIR Insulation Board XR4000

Celotex XR4000 is an easy to install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing. Available in thicknesses from 110mm to 200mm, it can be considered for roof, wall and floor applications. Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value. Low emissivity foil facing provides improved thermal performance in sealed cavity air spaces, improving the achievable U-value. Celotex boards are light and rigid assisting with ease of transportation, handling and fitting. Celotex XR4000 has been assessed by the BBA as fit for use in defined roof, wall and floor applications if installed, used and maintained as set out in the certificate. Please read the certification at insulation-UK.com/ BBA for full details and restrictions. To ensure we are providing you with the most up to date information available please visit our Manufacturer Technical Information page

4trade Victorian Bathroom Lock Handle Chrome

Premium quality door handles manufactured to the highest standard. Minimal installation required Hardwearing Easy to maintain Brass construction Comes with a spindle Used with tubular mortice latch

4FireDoorsDOORS Intumescent Fire & Smoke Seal White 10 x 4 x 1005mm Door Pack FD292

The intumescent fire seals expand in the event of a fire and seals off the gap between the door and the frame, preventing the spread of fire and smoke. This combined fire and smoke seal prevents the spread of smoke prior to the fire seal activating. It is very important to fit the correct size seal, please always check fire door manufacturers instructions. Certifire Approved CF846 Supplied with a self-adhesive backing for ease of application Comes With Fitting Instructions Low friction brush pile to aid door closing Rapid multi-directional expantion Unaffected by moisute and common chemicals Acoustic tested to BS EN ISO 140-3 Suitable for FD30 and FD60 doors Unaffected by moisture or common chemicals

130mm x 2400mm x 1200mm Celotex PIR Insulation Board XR4000

Celotex XR4000 is an easy to install polyisocyanurate (PIR) insulation board with excellent thermal performance, featuring a low emissivity foil facing. Available in thicknesses from 110mm to 200mm, it can be considered for roof, wall and floor applications. Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value. Low emissivity foil facing provides improved thermal performance in sealed cavity air spaces, improving the achievable U-value. Celotex boards are light and rigid assisting with ease of transportation, handling and fitting. Celotex XR4000 has been assessed by the BBA as fit for use in defined roof, wall and floor applications if installed, used and maintained as set out in the certificate. Please read the certification at insulation-UK.com/ BBA for full details and restrictions. To ensure we are providing you with the most up to date information available please visit our Manufacturer Technical Information page

Simpson STRONG-TIE L10F00 2.5mm Flat Restraint Strap 30 x 1000mm

Light and heavy restraint straps for vertical and horizontal restraints when connecting timber floors and roof systems to masonry walls Provides vertical and horizontal restraint when connecting timber floor and roof systems to masonry walls Conforms to BS EN 5268 Part 3 Pre-Galvanised and edge coated

4Trade Junction Box Brown 30 Amp 3 Terminal

30 amp rated junction box ASTA approved Heavy duty Multiple cable access/exit points Ideal for use in tight spaces such as in and under cupboards Fixings included