Category Archives: DIY
4Trade AX110 External Air Admittance Valve Black 110mm
Valves are manufactured in modified PVCu and are extremely durable and designed to provide secure solvent weld jointing. PVC-C provides superior fire performance and its high softening point means it is not adversely affected by very hot water discharges. The Air Admittance Valves are designed to allow the free entry of air into the sanitary pipework system without the escape of foul gasses into the building Product is A1 approved in accordance with BS EN 12380, it can be installed below the flood level of connected appliances Tested and approved for use in installations varying between -20° & +60°C (no insulation required) Airflow: 30.8 L/s Removal of unsightly ventilation stack Eliminates the need to work and handle pipe above the roof line Reduced installation time The 4Trade brand represents trade quality and value for money Statutory 12 months
Solid Medium Density 3.6N Concrete Block 100mm
This lightweight aggregate block from Tarmac is suited to a number of load bearing applications and provide a high level of performance. A medium weight solid block for internal and external use Ideal for plaster finishes and rendered outer leaves Straightforward, conventional block laying practice Secure background for fixings Easy to handle Resistant to fire and sound Proven high level of technical performance Any level of thermal performance can be achieved with additional insulation
Expamet Internal Plaster Stop Bead 2400mm x 13mm x 0.40mm
Expamet 13mm Plaster Stop Bead 2400mm, manufactured from 0.4mm Galvanised steel, for use as a trim for plaster up to openings and abutments
22mm x 2400mm x 600mm Egger Protect Grey Tongue and Grooved Chipboard Flooring TG4
EGGER Protect is manufactured from an EGGER P5 flooring grade particleboard with a unique, weather resistant surface layer applied to both the top and underside of the board. Laminated surface on both sides for added protection For structural use in accordance with EN 13986 Manufactured to EN 312 Tongued and grooved on 4 sides
Catnic Cougar Open Back Cavity Wall Standard Duty Lintel 900mm CG110/100
Open Back Cougar Lintels are for use in Cavity Wall construction. The lintels incorporate insulation, built-in plaster key and DPC. The lintels supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry. Duplex Corrosion Protection Built-in DPC Integral Plaster Key Continuous Insulation Formed from galvanised steel then powder coated Easy to use Cougar open back profile Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at 3000mm-3600mm
K Rend Silicone FT Render White
K Rend silicone FT render is a cement based, polymer modified self-coloured render. Ideal for external walls, it is applied with hands to provide a natural scraped texture finish. It can be used to coat the surface once or as part of a two-coat system in conjunction with K Rend base coat. Water-repellent Optimal adhesion Ideal for plastering applications Incorporates silicone technology Allows the substrate to breathe Highly flexible with excellent handling properties Easy to apply
Whitewood Door Lining Set and Stops 32 x 115mm 762/838mm Doors Finished size 27.5 x 108mm
Metsä Woods Softwood door linings are manufactured from slow-grown premium timber, which has been precision finished and fully machined. The main purpose of a casing or lining set is to surround all internal doors, allowing for easy installation of doors. Separate Door Stop Included Which Can Be Fitted Once The Door Has Been Installed Does Not Include Door Furniture Stable And Durable Supplied Unfinished, Ready To Paint Or Stain And Requires Finishing Using A Suitable Ronseal Paint, Stain Or Varnish Responsibly Sourced Timber
Pavetuf Jointing Compound – Buff 15kg
Pavetuf Jointing Compound – Buff 15Kg. Covers approx. 15m2* Saves time and money Apply with water Fast & easy to apply in all weathers No waste, excess product can be stored in the tub Can fill joint widths from 5mm-20mm & joint depths from a minimum of 20mm 10-15 times faster to apply than the traditional sand and cement jointing methods Inhibits weed growth
H+H Celcon Standard Aerated Concrete Block 3.6N 75mm
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion Internal and external leaf of cavity walls Solid walls Separating walls Partitions Multi-storey buildings Foundations Beam and Block floors Flanking walls
Marley Segmental Ridge Roofing Tile Smooth Grey – Pallet of 120
A half round ridge tile, suitable for all concrete, clay and fibre cement products and compatible with ventilated dry ridge systems. Smooth grey provides a dark, slate-like appearance. These fittings are suitable for use with concrete plain tiles, interlocking tiles and slates 15-55¡ dry ridge Compatible with Marley Universal RidgeFast
Catnic Timber Frame Steel Lintel Standard Duty 2400mm CTF5
The timber frame lintel range consists of single element lintel with a sloping outer face and duplex corrosion protection, which provides built-in DPC. All timber frame models must be secured with restraint clips (not supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage. Duplex Corrosion Protection Built-in DPC Restraint clips Standard lengths are available in 150mm increments up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575mm but excluding 4500mm) Timber frame lintels should be suitable propped during construction.
Calder Industrial Code 5 Lead Flashing 450mm x 6000mm
Lead roof flashing provides a long-term watertight roofing option and lasts three times longer than most man-made alternatives. Lead is one of the most environmentally-friendly materials used in the construction industry Lead sheet is produced from 100% recycled lead also recycled lead has a low carbon footprint and a low energy consuming melting temperature The initial installation cost of lead is comparable to man-made flashings when the additional expense of adhesives and sealants are taken into account Lead is quick and easy to install in most weather conditions and requires no adhesive or other fixing materials Alternatives are very limited in the types of applications that they can be used for, and would not be suitable for more decorative flashings for which lead is renowned When bossed or dressed correctly lead has few laps or joints resulting in a high degree of weather tightness Lead lasts up to 100 years and when used for flashings will last three times longer than most man-made products there is little post-installation inspection or maintenance is required All lead sheet should be coated with patination oil after installation Guides to cover flashing and step flashing are available at http://www.calderlead.co.uk/downloads/ or use the link at http://youtu.be/eS4CfS-K0PE and http://youtu.be/GBtvHif6bTE Please refer to the Calder Training Module Ask a Question for a quick guide to selling lead
Ibstock Brick Dorset Red Stock – Pack Of 500
Dark Red Sandfaced Stock Facing Brick. Order In Singles. See Tech Spec For Pack Quantity. Durable – Can Be Used In Most Masonry Situations
Catnic Timber Frame Steel Lintel Standard Duty 2100mm CTF5
The timber frame lintel range consists of single element lintel with a sloping outer face and duplex corrosion protection, which provides built-in DPC. All timber frame models must be secured with restraint clips (not supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage. Duplex Corrosion Protection Built-in DPC Restraint clips Standard lengths are available in 150mm increments up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575mm but excluding 4500mm) Timber frame lintels should be suitable propped during construction.
Wienerberger Facing Brick Staffordshire Smooth Blue (Perforated) – Pack of 400
A blue facing brick, selected for its aesthetic appearance. Selected for its technical properties Can be used below DPC Low Salt Content – S2 Occasionally there can be a lead time on bricks from the manufacturer. If this is the case, we will let you know as soon as possible
Polytank 241524 Rectangular Cistern 20 Gallon Including Full Kit
20 gallon actual capacity potable cold water storage tank. Kitemarked to BS4213 Includes lid Bye law 30 kit Insulation 1/2 inch BS1212 part 2 ballvalve 41/2 inch float 22mm compression tank connector 15mm x 1/2 inch angled service valve
Staifix 250mm Type 4 / Type A Housing Tie 1 Box
Type 4 wall tie for use in the external walls of houses and small commercial developments up to 10 metres in height. It is also a Type A tie for internal separating walls of buildings of any height. Suitable for 101-125 mm cavity width Includes multi drip feature to prevent moisture travelling across the cavity The Staifix HRT4 has BBA approval and meets the technical requirements of the NHBC CE Marked 1 box contains 250 ties
Clark-Drain Manhole Cover and Frame Ductile Iron 450mm x 600mm
Clark-Drain 600 x 450mm clear opening ductile iron manhole cover and frame with B125 load rating classification. For use in pavement, driveways and precinct areas B125 loading class BS EN124 accredited Includes frame Slide out access Unique corner design to ensure correct orientation of cover Integral lifting key holes Kitemark certified
Catnic Timber Frame Steel Lintel Standard Duty 2700mm CTF5
The timber frame lintel range consists of single element lintel with a sloping outer face and duplex corrosion protection, which provides built-in DPC. All timber frame models must be secured with restraint clips (not supplied) and a batten (not supplied) to prevent lateral deflection (twist) during the building stage. Duplex Corrosion Protection Built-in DPC Restraint clips Standard lengths are available in 150mm increments up to 3000mm, 300mm at lengths from 3000mm – 4800mm (including 4575mm but excluding 4500mm) Timber frame lintels should be suitable propped during construction.
Wienerberger Facing Brick Denton Peak Mixed Red – Pack of 400
Extruded red bark textured rustic Facing Brick. Selected for its high quality aesthetic appearance Conforms to BS and EU Standards Durability meets F2 rating for severe exposure Low Salt Content – S2 Occasionally there can be a lead time on bricks from the manufacturer. If this is the case, we will let you know as soon as possible
