Category Archives: DIY
H+H Celcon Solar Aerated Concrete Block 2.9N 100mm Pack of 120
This highly efficient block (thermal conductivity of just 0.11 W/mK) is sufficiently loadbearing for two storey buildings and can be used below DPC. Identified by the distinctive painted blue line, Celcon Solar Grade has a compressive strength of 2.9N/mm2 and is principally used where enhanced thermal performance is required. Internal and external leaf of cavity walls Solid walls Partitions Flanking walls Below DPC
25mm x 1200mm x 2400mm Xtratherm Pitched Roof Insulation Board
22mm x 125 mm x 1m Whitewood Planed Tongue & Groove Flooring Finished Size 18mm x 119mm
T&G flooring for ‘sub floor’ application – to accept a finish covering. Manufactured From High Quality Scandinavian Whitewood (spruce) Tongue And Grooved Profile On 2 Long Edges Durable Easy Ongoing Maintenance Note: Further Shrinkage May Occur After Laying All Of Our Softwoods Are Responsibly Sourced
Ibstock Brick Chailey Stock – Pack Of 370
Ibstock Brick Ashdown Cottage Mixture – Pack Of 500
Plaut External 2XG Unglazed Door Wooden Grey, Size: 1981x762x44mm
This 2XG door, is the ideal back door, allowing plenty of light into the room, the bottom panel can be removed to allow for glass replacement, converting the door to a 2XGG Doors are unfinished and require fully finishing on site to protect and prevent the ingress of moisture, which can cause warping. Does not include door furniture. Door furniture sold separately. A simple functional door ideal to be used as a back door A dowelled constructed door, the bottom panel can be removed to allow for glass replacement, glazing beads supplied loose pinned Can be trimmed up to a maximum of 12mm on any edge – any reduction should be removed evenly from each edge It is recommended that 3 hinges should be fitted to all doors weighing more than 20kg and doors where large differences of temperature or humidity on opposing faces can be expected. Supplied unfinished, seal and finish using at least 3 coats of a quality external paint Supplied unglazed suitable for both single or double glazed unit Solid timber construction Suitable for paint, stain or varnish
Flexseal SC120 Standard Coupling 105-120
Shear banded couplings are a requirement of the UK water companies when connecting onto their assets. This requirement forms part of Water Industry Specification (WIS) 4-41-01, which outlines the requirements to connect pipes on adopted systems using only shear banded couplings. The shear band gives the connection added protection against shear loads that could cause the pipes to become mis-aligned. Withstands an internal pressure of up to 2.5 bar A proven, tested and durable coupling design ensuring a high performance and a reliable connection Stainless steel shear band provides excellent resistance to heavy loads and shear forces to ensure joint integrity and pipe alignment Complies with WIS 4-41-01 (all public sewers and sewers for adoption) Complies with BS EN 295 Part 4 & EN681-1: 1995 requirements for vitrified clay pipes and fittings
Knauf Insulation FrameTherm Roll 35 3900mm x 1140mm x 140mm
An A1 Non-Combustible Glass Mineral Wool roll, manufactured using Knauf Insulation’s unique ECOSE® Technology, and designed specifically for use in timber frame applications between studwork. Designed to friction fit between timber studs, which prevents air movement and infiltration through or around the insulation, minimising heat loss Rolls are ready-cut into either 2x570mm or 3x380mm to suit commonly used timber stud spacing Manufactured from mineral wool which provides the best levels of sound absorption and reduction compared to other mainstream insulants
Eurocell Roofline Profile Upvc Fixing Nails White 50mm
Eurocell Roofline Profile Upvc Fixing Pins White 30mm
Supreme Prestressed Textured Concrete Lintel 65mm x 100mm x 2700mm P100
Precision made, high performance structural concrete lintels Lintels are designed and manufactured in accordance with BS 5977; Part 2; 1983 Declaration of Performance available at www.supreme-ce.co.uk Harmonized Technical Specification EN 845-2:2013 Order in singles. See Tech Spec for pack quantity. This product isn’t available for delivery in Scotland
Catnic External Solid Wall Steel Lintel Standard Duty 1500mm CN71A
The Classic Box lintel for use in external solid wall applications. The lintel is manufactured from galvanised steel and powder coated for extra protection. The box profile saves on brickwork and insulation, resists twisting during construction and is designed to carry a full load of wet masonry as soon as it is installed. Duplex Corrosion Protection Built-in Plaster Key Built-in DPC Integral Insulation Formed from galvanised steel then powder coated Easy to use Cougar open back profile Continuous insulation Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at 3000mm-3600mm
Premdor White Primed 4 Panel Grained Hollow Core Door 1981 x 838 x 35mm
The four panel grained door, offers a traditional appearance and excellent performance, a good choice for both modern and traditional interiors Mixed material construction combines one piece grain effect facings, timber and man-made materials Supplied primed ready to paint Comes with lock block located on one side of the door that is highlighted by inkjet printing on the top edge of the door Also available in glazed, fire door and bi-fold door versions Door may be trimmed by up to 10mm in height or width. Any reductions must be removed equally from each edge Door may be trimmed by up to 10 mm in height or width, any reductions must be removed equally from each edge Interior Moulded Door
Eurocell Roofline Profile Upvc Double Capping Board Joint Trim White
Silver Sand Trade Pack
120mm x 2400mm x 1200mm Xtratherm Pitched Roof Insulation Board
Staifix Frame Tie 130mm – Box of 100
Clark-Drain New Style Plastic Channel End Cap and Outlet Set 128 x 117mm
Electric Heating Company Compact CPSCOMP15KW Electric Flow Boiler 14.4KW
The Compact is a fully controllable electric flow boiler which is designed to maximise cupboard space. It can be installed as an open vented system or a conventional sealed system comprising – sold separately. The boiler temperature range can be set between 30°C and 80°C which also makes it a suitable choice for underfloor heating applications. The Compact has a user friendly front control panel incorporating heat mode and fault finding indicators, an on/off switch and easy-to-use temperature control setting. Safety is of paramount importance and as such our Compact boiler has been designed to include a unique high current safety cut-out device to protect the boiler. 100% efficient and fully modulating boiler Can be used with standard radiators and trvs Stainless steel heat exchanger No mandatory maintenance Can be used for underfloor heating High current thermal cut out Silent in operation Soft start to avoid power surges Can be installed almost anywhere