Category Archives: DIY
XL VICTORIAN CLEAR PINE 4 PANEL DOOR 1981 X 838 X 35MM
The four panel Pine door is a traditional design, that will enhance both the traditional and contemporary home Conforms to FCC codes Can be trimmed up to a maximum of 6mm on any edge – any reduction should be removed evenly from each edge Supplied unfinished and must seal and finish using at least 3 coats of a water based varnish, paint or wood stain Not suitable for polishing, waxing or treatment with any type of oil Recommended that 3 hinges are used when fitting this door. Recessed furniture and locks must not be placed within 76mm (3″) of any rail/side joint as this will weaken the door Also available in fire door and glazed versions Does not include door furniture Door furniture sold separately
Ibstock Brick Aldridge Ruskin Red 73mm – Pack of 332
Ibstock Brick Is Durable, Can Be Used In Most Masonry Situations And For Matching Old Brickwork Whilst Being Quick & Easy To Lay. Durable – Can Be Used In Most Masonry Situations 73mm High – Can Be Used For Matching Old Brickwork Quick & Easy To Lay High Strength & Low Water Absorption
Smiths Environmental SS5 Space Saver Hydronic Plinth Heater Grille with Hoses Brushed Steel
The space saver plinth heater will heat your kitchen without compromising on your design. It’s energy efficient, connects to standard heating systems and can be installed in dead space under kitchen units Connects and operates from the central heating system Durable Room size guide 37m3 Saves space Unit must be earthed
Travis Perkins Sand and Stone Ballast Bulk Bag
This ballast bulk bag gives a mixture of sand and stone ballast to be mixed with cement for concreting applications. Also suitable for other building projects such as to provide an even sub-base for driveways, shed bases and more. Minimum packed weight of 800kg +/- 5% Can be used for multiple purposes Can be used to fill voids in construction projects Delivered and unloaded in bulk bags for large projects Actual weight may vary depending on moisture content Ideal for concreting and general building use Resistant to fire Sourced locally
Plaut Redwood Ledged Braced Door 1981 x 610 x 40mm
This ledged and braced door is constructed using quality tongue and grooved redwood board, it is ideal for utilitarian uses Doors are unfinished and require fully finishing on site to protect and prevent the ingress of moisture, which can cause warping. Does not include door furniture. Door furniture sold separately. A traditional designed redwood door ideal for utilitarian uses Ledged and braced construction using quality tongue and grooved redwood board Can be trimmed up to a maximum of 12mm on top and bottom edge only – any reduction should be removed evenly from each edge It is recommended that 3 hinges should be fitted to all doors weighing more than 20kg and doors where large differences of temperature or humidity on opposing faces can be expected. Recessed furniture and locks must not be placed within 76mm (3″) of any r Supplied unfinished, seal and finish using at least 3 coats of a quality external paint or stain
Scotia Rustic Oak 16.5mm x 16.5mm x 2000mm
Scotia trim is ideal for covering the expansion gap between the edge of the wood floor and the skirting Covers expansion gap around perimeter of laminate and real wood flooring Easily cut to size and simple to fit Provides a neat and professional finish Stylish finish for any room The 4Trade brand represents trade quality and value for money
4Trade Mortice Sashlock 3 Lever 64mm Chrome
Suitable for added security on internal and outside applications such as sheds Suitable for both left or right hand doors with an easily reversible latch bolt
Catnic Cougar Open Back Cavity Wall Standard Duty Lintel 2100mm CG50/100
Open Back Cougar Lintels are for use in Cavity Wall construction. The lintels incorporate insulation, built-in plaster key and DPC. The lintels supports uniform distribution of masonry loads, timber floors and roof loads. Also suitable for fair faced inner leaf masonry. For 50-65mm Cavity, 100-115mm Inner Leaf Duplex Corrosion Protection Built-in Plaster Key Built-in DPC Integral Insulation Formed from galvanised steel then powder coated Easy to use Cougar open back profile Continuous insulation Standard lengths are available in increments of 300mm
Catnic Internal Wall Box Lintel Standard Duty 3000mm BSD100
Catnic lintel for internal partition and load bearing walls. Offering a cost effective solution for standard and heavy duty loads the universal application caters for all loading conditions. Duplex Corrosion Protection Integral Plaster Key Universal application caters for all loading conditions. For use in solid or block walls. Standard Duty Standard lengths are available in increments of 150mm at lengths up to 3000mm, 300mm at 3000mm-4800mm.
Ibstock Brick Funton Old Chelsea Yellow – Pack Of 500
A Yellow Multi Stock Facing Brick, Fully Durable With Low Soluble Salts. This Is A Moderate Strength Facing Brick With High Water Absorption, Ideal For Most Masonry Applications And Easy To Lay. Durable – Can Be Used In Most Masonry Situations
ROM Concrete Reinforcement Meshmen Castles 40-50mm 40MM50
ROM Concrete Reinforcing Meshmen provides a secure and stable platform to mount your rebar. High quality steel reinforcement for cast concrete application
4Trade Key to Suit Rack Bolt 2 Pack
Spare key suitable for doors and windows Splined key for use with the door and window rack bolts
XL VINE DX VERTICAL GRAIN 4 PANEL CLEAR PINE DOOR 1981 X 838 X 35MM
The vertical cut Pine door produces an attractive appearance in clear Pine, a traditional design that will suit any interior decor with flat panels and internal mouldings to create a classic look Does not include door furniture. Door furniture sold separately. Classic 1930’s style design with internal mouldings An engineered door, finished with vertically cut Pine Veneered producing an attractive appearance in clear Pine Can be trimmed up to a maximum of 6mm on any edge – any reduction should be removed evenly from each edge Recommended that 3 hinges are used when fitting this door. Recessed furniture and locks must not be placed within 76mm (3″) of any rail/side joint as this will weaken the door Supplied unfinished, seal and finish using at least 3 coats of a water based varnish, paint or woodstain This door is NOT suitable for polishing, waxing or treatment with any type of oil
External Plywood Flush Fire Door 60 Min 1981 x 838 x 54mm
This paint grade plywood veneer door comes in a range of sizes with a choice of standard core, fire rated core or fire rated core glazed with clear Georgian wired glass. A door that offers an economical solution for a wide range of houses and public build Does not include door furniture. Door furniture sold separately. A veneer faced door suitable for paint finish, lipped on two long edges A high density core material achieving fire resistance up to 60 minutes (FD60) Fire Doors must not be trimmed on top edge, only up to 5mm on bottom edge and 3mm on stiles Fire Doors must be fitted with 3 hinges and positioned as per instructions and must be installed in conjunction with an appropriate Fire Door Frame. Recessed furniture and locks must not be placed within 76mm (3″) of any rail/side joint as this will weaken the door Supplied unfinished, seal and finish using at least 3 coats but no more than 5 coats of paint Part L compliant : (Indicative U value 2.2W/m²K)
Fillcrete Fillaboard Expansion Joint Strip 12mm x 100mm x 2440mm
12mm 100 x 2440 Strips of Fillaboard Bitumen Impregnated fibreboard for all your requirements for concrete expansion and movement joints packed in 20 strips per pack. General purpose expansion joint filler meeting DOT and BAA specifications Manufactured from specially formulated impregnated fibreboard with a minimum 10% bitumen content Typical applications would include: concrete paths, foundation slabs, roads and airport runways It can also be used as a backfill protection board for below ground applications Packed in 20 strips per pack
Warmup 140W Foil Heater 8M² Wlfh-140W/1120
The Warmup Foil Heater is a streamlined electric radiant floor heater designed for use with carpet, vinyl, wood and other floating floors. Installed directly under floor finish; no self-levelling required Fully earthed flat aluminium foil will not raise floor levels Wire based system can be adapted to fit around objects Great for heating under floating floors such as laminate and hardwood Construction: Wire with advanced fluoropolymer insulation, encased in aluminium foil Width: 500mm (0.5 metre), Mat thickness: 3mm Output Rating: 140W/m² Approvals: BEAB, European compliant and CE marked 15-Year warranty SafetyNet™ Installation guarantee
Hyco Speedflow Pressure Reducing Valve And Expansion Vessel Kit
An expansion vessel, check valve and pressure reducing valve kit. To be used in conjunction with Hyco Speedflow unvented water heaters 2 litre expansion vessel set at 3.5 bar with pressure reducing valve Comes with one way check valve Weight of Expansion vessel 1.0 kg, Check valve 0.1 kg, Pressure reducing valve 0.3kg Height of Expansion Vessel 225 mm, Check valve 65 mm, Pressure reducing valve 73 mm WRAS Approved
K Rend K1 Spray White
Easy to use, self coloured render, machine or hand applied to provide a scraped texture finish. For use both as a one coat render or as part of a two coat system Machine or hand applied One coat directly on to block work Two coat in conjunction with a K Rend Base Coat Excellent handling properties Can be used onto lower strength block work Easy application and workability Greater Flexibility Designed for machine application Available in a wide variety of colours
Supreme Prestressed Textured Concrete Lintel 100mm x 140mm x 2100mm R15
Precision made, high performance structural concrete lintels Lintels are designed and manufactured in accordance with BS 5977; Part 2; 1983 Declaration of Performance available at www.supreme-ce.co.uk Harmonized Technical Specification EN 845-2:2013 Order in singles. See Tech Spec for pack quantity. This product isn’t available for delivery in Scotland
Easy Trim Easyverge Hr Ridge Cap And Flapcap Grey
Easy Verge Ridge Caps With Flap Cap Technology. Our High Quality, Uv Stable Angled And Half Round Ridge Caps Incorporate Unique And Innovative Flap Cap Technology. Flexible Flaps Contour Around The Sides Of The Easy Verge U System Effectively Creating A Sealed Unit That Prevents Water Ingress And Infestation. Available In Grey, Brown, Terracotta To Match Our Dry Ridge. Easy And Quick To Install Unhanded For Use On Both Sides Of The Roof A Range Of Colours Available High Quality A Ridge End Cap To Cover The Ridge At The Roof Apex Unique Design Creates A Completely Sealed Verge Preventing Water Ingress And Insect/bat Infestation Made From Uv Stable Polypropylene
