Bostik MC250 Vitri-Flex Rapid Set White Wall & Floor Tile Adhesive 20kg

Bostik MC250 Vitri-Flex is a fast-setting, flexible wall and floor tile adhesive in white. It is suitable for bonding ceramic tiles, quarry tiles, porcelain, vitrified tiles, natural stone and mosaics to wall and floors. This white, rapid-setting wall and floor tile adhesive is formulated for fast track installation and enables tiles to be grouted in approximately 2 to 3 hours after fixing, depending on conditions. It provides excellent grip and adhesion. Bostik Vitri-Flex tile adhesive is suitable for most interior and exterior installations including more demanding installations, such as use with underfloor heating and areas subject to limited vibration. When fully cured the adhesive is suitable for permanently wet areas such as showers. It will bond to concrete, plaster, sand/cement render and screeds, blockwork, brickwork, glazed surfaces, vinyl tiles, plywood overlay and more. One of Bostik’s best adhesives for vitrified tiles. Available in a 20kg bag. White flexible wall and floor tile adhesive Enhanced grip and adhesion to fully vitrified, porcelain, ceramic, quarry and natural stone tiles Thin or thick bed adhesive – formulated for a fast track installation Tiles can be grouted within approximately 2 to 3 hours after fixing, depending on conditions Needs no flexible additives – just mix with water Suitable for use with WBP 15mm plywood overlay Suitable for use with underfloor heating C2FT S1 For interior and exterior use